功能特点 Features:

适用于各种线束捆扎。尤其适用于飞机、火车、船舶、汽车、通信设备、家电及其它大型机电设备的现场装配时的内部线束捆扎。也适用于物品包装或固定、气液传输管道接头固定、食品封装、及袋装液体封装等。

※ 没有振动盘，整机小巧，噪音小;

Without vibration feeding, the machine is smaller and the noise is lower ;

※ 根据产品特点，可以使用手持枪头，也可以使用固定枪头;

According to the object , you can use the hand-held qun or fixed qun ;

※ 使用连体料,使用压缩空气通过送料管将扎带送入枪头;

Use strip type cable tie, compressed air push the cable tie to the Tool via hose

※ 扣动扳机或踩脚踏板，自动完成送料、卷带、收紧、切断，抛废料等所有动作;

Pulling the trigger or tread the pedal , automatically Wrapping, Perforating, Pulling &

Tightening, Cut off, Collecting the waste material into waste tank.

※ 只要被捆扎物体直径在设备的可捆扎的规格范围内，设备自动适应不同直径的物体，不需要为捆扎

不同大小的物体做任何调节。

The machine could bind the object with different diameters without any adiustment as long

as the object diameter is within the spec described in the table.

※ 1.2秒完成送料、卷带、收紧、切断，抛废料等所有动作。

The whole operation takes only 1.2s.

※ 废料通过专门的回收系统自动收集于废料盒(可选配置):

Different waste material collecting methods for choice.

※ 手持枪头重量轻，握柄设计小巧，易于握持，长时间使用不会感觉疲劳;

Ergonomic hand shank design, comfortable to hold & operate.

※ 捆扎力度或松紧可通过旋钮调节;

Binding force is adjustable by turning the knob.

※ 可配合机械手在自动生产线中实现全自动扎带，也可固定于台面作为台式扎带机使用;

Could be fixed as desktop type; and could be applied to full automation line.

※自动检测堵料，如果发现堵料，机器立即停止运行，自动清理堵料，并自动启动。

lf there is any cable tie jammed in the Tool or in the hose, the machine would stop running

and automatically clean the jammed cable tie, and then restart automatically.