通用型UL试验弯指PA100A

标准：

UL22|UL48|UL73|UL153|UL399|UL474|UL496|UL499|UL507|UL508|UL508C|UL982|UL998|UL1012|UL1017|UL1026|UL1082|UL1083

|UL1206|UL1278|UL1310|UL1573|UL1598|UL1727|UL1993|UL5085-1|UL8750|UL60065|UL60335-1|UL60950等要求

技术参数：

端部 3.5mm / 30°

三关节长度  各长 30mm

用途/Apply:  家用和类似用途电器防触电保护试验的必备器具。

通用型UL试验弯指PA100A

使用方法：

UL507。表9.1中所示和图9.2所示的探头应适用于开口允许的任何深度，并应在插入开口之前，期间和之后旋转或倾斜至试图接触非绝缘带电所需的任何位置。部分或薄膜涂层的电线。如有必要，在插入开口后应改变配置。配置是指探针UL60950-1的连接部分的定位。图EE.3的铰接式可达性探头应插入机械外壳的每个开口中，不会产生明显的力。试验手指不得接触危险的运动部件。当家庭和办公室/办公室文件/媒体支持者按照制造商的使用说明按预期安装时，此考虑适用于机械外壳的所有侧面。在某些情况下，当应用测试手指和楔形探针时，可能需要操作设备以确定可接近性（例如，在单元通电并准备好使用后仅打开防护装置或盖板）。

通用型UL试验弯指PA100A

UL507. The probes referenced in Table 9.1 and illustrated in Figure 9.2 shall be applied to any depth that the opening permits and shall be rotated or angled before, during, and after insertion through the opening to any position that is necessary to try to contact an uninsulated live part or ?lm-coated wire. If necessary, the con?guration shall be changed after insertion through the opening. Con?guration refers to positioning of the jointed portions of the probes UL60950-1. The articulated accessibility probe of Figure EE.3 shall be inserted into each opening in the MECHANICAL ENCLOSURE, without appreciable force. The test ?nger shall not contact hazardous moving parts. This consideration applies to all sides of the MECHANICAL ENCLOSURE when the HOUSEHOLD AND HOME/OFFICE DOCUMENT/MEDIA SHREDDERS is mounted as intended in accordance with the manufacturer’s instructions for use. In some cases, operation of the equipment may be necessary to determine accessibility (for example, where a guard or cover is only opened after the unit is energized and ready for use) when applying both the test ?nger and wedge probe.

通用型UL试验弯指PA100A