AIRTAC铝合金迷你气缸结构分类
气缸接入管道前，必须清除管道内脏物，防止杂物进入气缸内；
气缸使用介质应经过40μm以上滤芯过滤后方可使用；
A variety of cylinder and cylinder installation accessories for customers to choose to use.
Work load changes, should use the output force of the cylinder;
In high temperature or corrosive conditions,
should use the appropriate high temperature or corrosion resistance cylinder;
In the humidity, dust, or water droplets, dust, welding slag of the occasion,
 the cylinder should take the necessary protective measures;
在低温环境下，应采取抗冻措施，防止系统中的水分冻结；
避免侧向负载，否则活塞杆会弯曲变形且损坏杆端螺纹。单动型不可在回程时加载；
气缸拆下长时间不使用，要注意表面防锈，进排气口应加防尘堵塞帽，特别注意：前、后盖不可拆卸。
Front and rear cover and cylinder with threaded connection;
Piston seal with special-shaped two-way sealed structure, compact size, with oil storage function;
Front cover with self-lubricating bearing-oriented, good lubrication and guiding performance;
A variety of back cover form, the cylinder installation more convenient;
执行亚德客企业标准，采用铝圆管缸体；
前后盖与缸管采用螺纹连接；
活塞密封采用异型双向密封结构，尺寸紧凑，有储油功能；
Cylinder removed for a long time do not use, pay attention to the surface rust,
into the exhaust port should be added dust plug the plug,
 with particular attention: front and rear cover can not be removed.
The implementation of Yade off business standards, the use of aluminum tube cylinder;
前端盖采用自润滑轴承导向，润滑与导向好；
多种后盖形式，使气缸安装更方便；
多种规格的气缸及气缸安装附件可供客户选择使用。
Cylinder access to the pipeline before the pipeline must be removed dirt, to prevent debris into the cylinder;
工作中负载有变化时，应选用输出力充裕的气缸；
在高温或者腐蚀性条件下，应选用相应的耐高温或耐腐蚀性气缸；
在湿度大，粉尘多，或者有水滴、油尘、焊渣的场合，气缸应采取必要的防护措施；

AIRTAC铝合金迷你气缸结构分类