T-600C 纤芯直视型光纤熔接机

住友光纤熔接机T600C

• 城域网光线路工程机型

---

触摸屏控制住友光纤熔接机T600C

• 全导航触摸屏界面，使操作更简单更便捷

• 4.1英寸彩色LCD显示

---

住友光纤熔接机T600C更完善的耐环境特性

• IPx2 水性

• IP5x 尘性

• 50°C温度下可熔接作业

• 海拔6000m高度可工作

• 76cm高度坠落（5面）冲击

规格参数

T-600C (更多信息请联系我们)

住友光纤熔接机T600CApplicable optical fiber	Material	Silica Gl
	Profile te	Single Mode Fiber (F)/ITU-T G652 Multi Mode Fiber (MMF)/ITU-T G651 Dispersion Shifted Fiber (DSF)/ITU-T G653 Non-Zero Dispersion Shifted Fiber (NZ-DSF)/ITU-T G655, G656 Bend Insensitive Fiber (BIF)/ITU-T G657
	Number of fiber	Single
	Cladding diameter	φ80 to φ150 μm *1
	Coating diameter	φ100 to φ1,000 μm
	Cleave length	5 to 16 mm (with coating clamp) 10mm (Drop cable / Indoor cable with fiber holder)
住友光纤熔接机T600CApplicable Cable*2*3	0.25 mm primary coated 1-fiber drop cable	3.1mm or 2.6mm×2.0mm (excluding msenger steel wire)
	0.25 mm primary coated 1-fiber indoor cable	2.0mm×1.6mm
住友光纤熔接机T600CSplice Performance	Splice loss (tical)*4	F : 0.02 dB MMF: 0.01 dB DSF : 0.04 dB NZDSF : 0.04 dB
	Return loss (tical)	60dB or greater
	Screening load (tical)	1.96N - 2.09N (at stage)
	Splice time (tical)	Approx. 7 seconds ( G652 Quick Mode) Approx. 9 seconds (Auto Mode)
	Automatic fiber identification	F / MMF / Other
	Splice & Heat cycl*5	Approx. 230 cycl (BU-11)
	Fiber view & magnification	2 CMOS cameras observation, 320X (zoom：700X) for X or Y single axis view, 88X for X & Y dual axis view
	Splice program	Maximum 300 splice programs can be selected and customized.
	Splice data storage	10,000 splic
	Splice image capture	200 splic
Fiber Alignment method	Core	Aligns the left and right fibers by the center of their cor.
	Adaptive	The alignment method mainly for BIF. It is used in splicing optical fiber with complicated core profil.
	Diameter	Aligns the left and right fibers by their outer diameter.
	ATTN	“Attenuation”. Fibers are spliced by shifting the centers of the left and right fiber cor to achieve intentional high splice loss.
住友光纤熔接机T600CHeater Performance	The number of heaters	Single
	Sleeve length	Up to 60mm
	Protection sleeve *6	The protection sleeve for single fiber, up to 60mm length, up to φ5mm diameter. e.g. FPS-1 (single, 60mm, Cleave length 5-16mm) FPS-61-2.6 (thin, single, 60mm, Cleave length 5-16mm) FPS-40 (single, 40mm, Cleave length 5-10mm) FPS-40-2.6 (thin, single, 40mm, Cleave length 5-10mm)
	Heating time(tical) *7	Approx. 20 seconds (Slim 60mm 0.25 Mode)
	Program	Max. 100 settings
住友光纤熔接机T600CPhysical Characteristics	Size (Main body) *8	120W×154D×130H(mm)
	Weight	Approx. 2.0 kg (With Battery pack BU-11)
	Display size	4.1" touch screen color LCD display
	V-groove illumination	White LED
Power Conditions	Power consumption	Max. 110W
	AC operation	With AC adapter ADC-1430 seri Input: AC 100-240V 50/60Hz 1.1A
	DC operation	Input: DC 10-15V, 7.5A
	Battery operation	(With BU-11) 11.1V (4600mAh)
	DC output	12V For Sumitomo’s hot jacket remover
住友光纤熔接机T600CIn - Out Terminal	Serial port	U 2.0 mini-B te
	Storage media	SD / SDHC memory card
Environmental Conditions	Operating temperature	-10 to +50°C
	Storage temperature	-40 to +80°C
	Humidity	0 to 95%RH with no dew prent
	Altitude	Up to 6,000 m
住友光纤熔接机T600CEnvironmental Durability*9	Shock ristance	Drop from 76cm on 5 fac (Excluding face)
	Water ristance	Equivalent to IPx2 (Operat normally after being exposed to water ping at 3mm/min. for at least 2.5 min on each of 4 surfac tilted at 15 degree.)
	Dust ristance	Equivalent to IPx5 (Operat normally after 8 hours in a dust chamber containing dust of particle size 75 um or below)

*1 Cladding diameters, except φ125μm, are applicable only for splicing in room temperature.
*2 Fiber holders appropriate for the fiber coating and fiber count are required.
*3 The fiber holders cannot be used with loose tube cable which optical fiber is free to move about in.
*4 Average value of the final inspection in room temperature with Sumitomo identical fiber. Measured by cut-back method relevant to ITU-T and IEC standards. 
*5 Splice & Heat cycl may vary depending on the battery status and the operating environment.
*6 The 40mm protection sleev can be used only if the cleave length is ls than 10mm. Do not use the 40mm protection sleev for fibers with more than φ250μm coatings.
*7 With Sumitomo protection sleeve FPS-61-2.6, Coating diameter φ250μm (in room temperature, powered with AC adapter, DC output port not in use)
*8 The projection parts are excluded.

*9 Confirms the battery operation in tts carried out by Sumitomo. Do not guarantee that the product is free of faults or damage.住友光纤熔接机T600C

住友全系列熔接机供应，600C,81C,81M12，400S

通讯主要产品：光纤熔接机，光时域反射仪，2M误码测试仪，光缆普查仪，光功，光源，插回损测试仪，光纤寻障仪等，代理品牌有：住友，藤仓，古河，康未，一诺，相和，瑞研，信测，诺克，安立，EXFO，JDSU,罗意斯，横河；