介绍SMC方型缸体气缸技术性能

基本简介：
· Magnetic switch mounting parts / parts type
With magnetic switch (CD series: CDS2)
Rod non-turn type MB1K single rod double acting 32,40,50,63,
Using a built-in lever structure, can be installed magnetic switch slot cover, to prevent dust into and accumulation.
With magnetic switch (MDB1 series: MDB1, MDB1W, MDB1K)
方型缸体气缸这个可能使用的行程，与使用压力的高低、
气缸的安装形式和缸径有关，与负载率无关。
The minimum travel of the magnetic switch can be installed
? The appropriate position for the magnetic switch installation (travel end checkout
Time) and installation height

原理说明：
方型缸体气缸自身的作用力作用在活塞杆上，
或者作用在活塞杆和缸筒上，假定作为弯曲力，通过计算，求得的
可能使用的行程列于下表中(以cm为单位)。
The role of the cylinder itself on the piston rod,
Or acting on the piston rod and cylinder, is assumed to be calculated as a bending force
The maximum possible stroke is listed in the table below (in cm).
This may use the maximum stroke, with the use of the level of pressure,
可安装磁性开关的小行程
·磁性开关安装的适当位置（行程末端检出
时)及安装高度
·动作范围·磁性开

关安装件／零部件型号
带磁性开关(CD系列：CDS2)
杆不回转型 MB1K  单杆双作用 32,40,50,63, 
采用了拉杆内置型结构、可安装磁性开关槽盖、防止灰尘进入和堆积。
带磁性开关(MDB1系列：MDB1、MDB1W、MDB1K)
The mounting form of the cylinder is related to the bore, regardless of the load rate.
Built-in magnetic ring and no magnetic switch occasions, magnetic switch
The symbol of the model is marked without mark.

介绍SMC方型缸体气缸技术性能