产品详情大图
日本COCORESEARCH 周期速度计TDP-3921-R 测速计 原装
价格：电议
地区：广东省 深圳市

深圳市赛德力检测设备有限公司

免费会员 营业执照已上传

>
全部产品 进入商铺

日本COCORESEARCH  TDP-3921-R 周期速度计 测速计  原装

A special tachometer, TDP-3921-R, is the first choice of Japanese car industry due to its unique functions. It offers two channels photo MOS relays output and RS-232C high-speed communication. Above all, it has unique optional functions like BCDand analog output with an ideal response time of1ms.Its measurement range is from 0.0006Hz to 100kHz with a programmable display to read out in terms of wide range of units like rpm, rps, Hz, km/h, l/min, g/h, etc. 


Features
●High speed analog output

The measured value can be transmitted as -10 to 10V analog signal (0 to 10V when input is single phase pulse) to other devices / system such as data logger or PLC. The polarity of analog output follows the direction of rotation of pulse generator. The analog signal can be scaled, e.g. 0 to 10V = 0 to 8000rpm. Where as the updating time is 1ms.
●

Wide range


Input frequency range is 0.0006Hz to 100kHz without any change in range. The display accuracy is 20ppm±1digit.

●

Employing PERIOMATIC technology


The forecast computation PERIOMATIC, versatile software, is the principle of working of TDP-3921-R. It enables the user to get analog output voltage even in the presence of heavy fluctuations. The PERIOMATIC has stop (zero speed) forecasting function, so the TDP-3921-Rimmediately responds to sudden stop of the incoming pulses.

●Compatibility to variety of Inputs

The TDP-3921-R can directly be connected to varying sensors like AC magnetic pickups, rotary encoders, proximity sensors, and pulse output devices. The TDP-3921-R can detect the direction of rotation of pulse generators and indicate it by minus or plus sign on LED display and analog output when 2 phase signals are applied.
●Large 14.2mm bright LED display with fixed or floating decimal point
●Three kinds of averaging function, time average, moving average, and pulse dividing average are used to dealt with irregular and heavily laden with fluctuation incoming pulses.
●It offers independent and programmable updating times of display and analog output

 

Specifications
NamePeriomatic tachometer
ModelTDP-3921-R
MeasurementPERIOMATIC processing
【Input】
Number of inputs1
Input frequency range0.0006Ｈｚ-100ｋＨｚ
Resolution102ns (9.8MHz)
Input method1)Single phase pulse
2)UP/DOWN signals of 2 inputs (separate pulse)
3)2 phases A and B with 90phase difference
Input pulse widthMIn.4s (both H level and L level)
Input lovelLogic : logic signals of more than 3.5V in H level and less than 1V in L level
Zerocross : alternative signal between 100mV to 30V
Withstand voltage30V
Input connectorTerminal block (7.62mm intervals, M3 terminal screw)
Sensor power supply+12V 50mA max
【Processing】
Measurement modeFrequency meter mode / Period meter mode
Operation rateSetting the displayed value against input frequency
Input frequency rate : 0.00001-999999 (Hz)
Display rate : 0.00001-999999
Dividing rate (pulse average)1-999 (divided frequency by software)
Number of moving average1-8
Dynamic forecastTM8 steps
(continuous estimate and, one cycle maintaining are included)
Chatter suppressing functionThe chattering is removed
Dual rangeSetting two kinds of operation rate
Memory of the set valueINonvolatile memory (EEPROM)
【Display】
Displayed colorsRed LED
Display7 segments of LEDs, character height is 0.56" inches (14.2mm)
Display digits6 digits
Range of display-199999-999999
Display of polarity-means lighting, +means no lighting
Over displayBy the OL display
Zero displayReading of zero suppression
Position of decimal pointAutomatic range and fixed range
□□□□□□.- □.□□□□□　
Display update time0.1-99.9s
Display accuracy20ppm 1 digit @23
【Analog Output】
Output voltage range10V
ResolutionAbout 10000 (-10V - +10V)
Output updating time0.001-99.99s
Full scale setting rangeDisplay value setting in full scale (0.00000-99999)
Load resistanceMin. 4.7k
Output accuracyMax. 0.2% of full scale @23
Temperature fluctuationMax.200ppm/
LinearityMax. 0.1%
【Comparator Output】
Number of channels2 channels (HIGH and LOW)
Output signalIsolated noncontact output (photo moss relay)
RatingDC 350V maximum 80mA (resistance load)
AC240V maximum 80mA (resistance load)
ON resistanceUnder 50
Updating timeSynchronization is selected for display updating time and analog output updating time
Response timeMax. 3ms
Output connectorTerminal block (7.62mm intervals, M3 terminal screw)
【RS-232C】
Communication methodAsynchronous commmunication method
Communication levelSerial communications by RS-232C
Communication parameterFixed at baud rate of 2400bps
Communication connectorHexpole plug-in phone jack
Output timingCommunication output of displayed data at every display updating
【General】
Power supply input
*factory delivery option)		TDP-3921-RA10 AC100V 10% 50/60Hz
TDP-3921-RA11 AC115V 10% 50/60Hz
TDP-3921-RA20 AC200V 10% 50/60Hz
TDP-3921-RA23 AC230V 10% 50/60Hz
TDP-3921-RDF DC9.6-30V
Electric power consumptionMax. 8VA
Outside dimentions96 (W) × 48 (H) × 150 (D) mm DIN standards
WeightApproximately 700g
Operating temperature & humidity limits0 to +40 / Under 85%RH (no dewing)
Storage temperature-20 to +70