【质量】CI-50-0.1美国Dynasen公司PVDF用电荷放大器
价格:电议
地区:陕西省
电 话:029-81773844
手 机:15802967400
传 真:029-81773844

【质量】CI-50-0.1美国Dynasen公司PVDF用电荷放大器


1.  电荷放大器CI-50-0.1 or CI-50-0.01介绍


电荷转换器是简单的无电感被动设备,用于压电型压力传感器,可以生成直接准确的相互作用冲击波的波形。CI-50-0.1电荷转换器使用任何一个压力范围过0-100KbarPVF2传感器,具有以2×10-8秒响应时间产生直接波形的转换能力。

每个传感器范围的直接输出电荷可以用该传感器的电容(0.1微法拉)乘以测量转换器的输出电压来获得,从而用压电薄膜传感器刻度推测压力状态。

   CI-50-0.01适用于低压。

 

2.  电荷放大器CI-50-0.1 or CI-50-0.01图片

CI-50-0.1.jpg


3. 电荷放大器CI-50-0.1 or CI-50-0.01尺寸图


integrator.gif

4. 电荷放大器CI-50-0.1 or CI-50-0.01详细参数


Piezofilm Converter – For use @ pressures below 0.1kb. Charge and integrators are simple non-inductive pive devices that can be used with piezoelectric stress gauges and are capable of yielding direct and accurate wave forms of the interacting shock waves. Our CI-50-0.1 charge integrator is a general purpose converter capable of yielding direct wave profiles with time resolution of 20 nanoseconds. using any size PVF 2 sensor over a 0-300 Kbars stress range. A direct output charge per unit area of the gauge can be obtained by multiplying its capacity (0.1 microfarad) by the measured converter’s output voltage and thus, inferred into a state of stress using the piezofilm gauge’s calibration. Our Model CI-50-0.01 is for very low pressure applications only. Please consult our technical staff prior to ordering.


5. 电荷放大器CI-50-0.1 or CI-50-0.01连接方式

 PVDF接线方式.jpg