0-氧气分析仪 型号:HY84/5100库号：M396982        概述
NTRON 新推出的5100P 是一款价格便宜、使用寿命长的便携式的氧化锆分析仪。型号5100P 采
用迷你氧化锆传感器。这种传感器技术比其他传统技术更占优势。因而更具稳定、寿命长。3-5 年
的典型应用！
特点
● 长寿命的传感器 (3-5 年)
● 提供多种的输出
● 预热时间短: 2 分钟
● 能使用于大气中或在实际气压的抽样中！
● 感应器不会干燥或冻结
● 体积小,可携带
● 内置取样泵
● 传感器不受位置影响
● 超大，高亮度显示
● 标准输出:RS-232 通讯接口，4-20MA ，
● 电压输出，继电器报警



The Ntron Model 5100 provides an affordable and versatile Oxygen Analyzer solution ideal for portable and fixed gas generation standard process monitoring. The unit delivers high-purity gas measurement in a range from 0-1% through to 0- in an auto range or fixed range modes.

A small footprint and compact size makes the Ntron 5100 easy to install. The unit’s expected operational life is five to ten years.

The low-maintenance, long-life Zirconia sensor has virtually unlimited shelf life and will not dry out or freeze.

Specifications:
Sensor: Mini Zirconia Sensor

Measurement Range: 0-1%/0-10%/0-25%/0-50%/0- auto range or fixed range

Display: 0.75” (19.05mm) LED digital display, Color coded LEDs for system status, Alarms 1&2= RED, system fault= YELLOW, OK and online= GREEN

Response Time:<15 sec. for 90% step change

Intrinsic Error (accuracy):
At constant temperature: ±2% range
Over operating temperature: ±5% range
When calibrated @ target concentration @ STP: ±1% range
Operating Temperature: 5 to 45o C

Signal Interface: RS-232 service port, 4-20mA negative ground, 0-10VDC range ID and choice of 0-1VDC or 0-5VDC or 0-10VDC analog oxygen signal

Alarm Outputs: Two alarms with adjustable form C relay outputs. Configurable for fail-safe or fail-alarm mode, ascending or descending trip. One system fault relay.

Sample Port: 1/8” NPT female ports

Electrical Connections: Removable terminal blocks on back of analyzer

Power, Analyzer: 5W at 115/230VAC 50/60Hz, single phase or 10 Watts @ 12-30VDC (battery backup capability)

Environmental Ratings, Analyzer:
Faceplate: NEMA type 4, IP66
Housing: NEMA type 1, IP20
Warranty: Electronics and sensor: One yr.

Weight: Analyzer: Less than 2 lb. (0.9 kg)