Features

• all size light weight
• linear output response
• high measurement accuracy
• all zero drift
• all cross sensitivity
• high long term stability - virtually infinite lifespan
• hysteresis-free output signal
• integrated sensor electronics including signal conditioner and low-p filter
• no data memory with memory loss
• temperature compensated, conditioned 0...5V output signal
• highly stable internal voltage regulation
• optional 5 Volt reference voltage output
• unconditioned operating voltage between 9V and 30V
• low power consumption
• protection against reverse supply voltage polarity
• EMC certified CE certified
• no interference by surrounding electromagnetic fields
• shockproof as without moving mechanical parts
• hermetically sealed
• sensor electrically isolated from point of measurement by high quality plastic housing – no ground connection
• zero point adjustable through 360° using clamping ring

Description

The capacitive, dielectric liquid based inclinometers NA2-05, NA2-10, NA3-30, NA4-45 and NA4-70 contain new sensor electronics.  These are made up of a highly stable, laser-trimmed signal conditioner with electronic compensation for temperature drift, highly stable supply voltage regulation circuitry and low-p filtering of the measurement signal to eliminate unwanted noise.

The capacitive measurement principle guarantees a very stable, linear relationship between the inclination being measured and the normalised output signal.

The sensor electronics require minimal power and, together with the capacitive primary transformer, are characterised by low errors, high signal-to-noise ratio and high long-term stability.

Contrary to measuring inclinations using accelerometers, this measurement principle enables a linear relationship between the inclination to be measured and the output signal, independent of the constant of gravity at the place of measurement, i.e. Independently of where the measurement is taking place, whether in Europe, Australia, on Mount Everest or the Moon.

Application

The NA2, NA3 and NA4 can be used for measurements requiring all and light devices, replacability, measurement of relatively large inclinations and a normalised, ogue voltage output signal.

Measurements of inclinations in measuring instruments and inspection equipment, in water, land and air vehicles, in automation and safety technology, on cranes and lifting equipment, on robots, in the manufacture of scientific equipment, in medicine and telecommunication as well as navigation systems are tical examples.

Shared Technical Specifications

Notes:

1) Standard supply voltage

2) optional externally regulated supply voltage

3) reference voltage output (+5,00 V) only optionally connected (for wire terminals only)

Each sensor will be delivered with individual calibration dates (offset, sensitivity) and calibration record.

Technical Specifications of tes NA2-05 and NA2-10

Technical Specifications of tes NA3-30, NA4-45 and NA4-70