长寿命铝电容400V100UF
价格:电议
地区:广东 东莞市
电 话:86 0769 33287982
手 机:13662958961
传 真:86 0769 83861559
Bitmap
东莞市科尼盛电子有限公司
Dongguan Conix Electronics Co.,Ltd.
                        
SHLSERIES                 KNSCHA
●105℃, High Frequency, Low Impedance.  Bitmap
 
      Bitmap  
●105℃, 3000~5000 hours guaranteed.            
■SPECIFICATIONS                      
Item项目Characteristics特性
Operating Temperature
Range使用温度范围
-55 ~ + 105℃- 40 ~ + 105℃- 25 ~ + 105℃
Voltage Range电压等级6.3 ~ 100V.DC160 ~ 400V.DC450V.DC
Nominal Cap. Range
标称容量范围
0.47 ~ 10000 μF3.3 ~ 220 μF2.2 ~ 33 μF
Capacitance Tolerance
静电容量允许差
- 20% ~ + 20% (at 20℃, 120Hz)
Leakage Current  漏电流                     
WV6.3 ~ 100 V.DC160 ~ 450 V.DC  
LCI= 0.01CV or 3(μA) whichever is greater.(after 2 min.)         Time
CV
1 Min.5 Min.  
I= 0.03CV or 4(μA) whichever is greater.(after 1 min.)CV≦1000I=0.1CV+40μA MaxI=0.03CV+15μA Max  
CV﹥1000I=0.04CV+100μA MaxI=0.02CV+25μA Max  
where,I: Max Leakage Current(μA), C: Nominal Capacitance(μF), V: Rated Voltage(V) (at 20℃)
Dissipation Factor (tanδ) (at 120Hz,+20℃)损耗角                     
WV6.3101625355063100160~250400450       
tanδ0.220.190.160.140.120.100.090.080.20.240.24       
0.02 is added to every 1000μF increase over 1000μF.
Low Temp. Impedance Stability at 120Hz  阻抗稳定性   Bitmap Bitmap              
Rated voltage (V.DC)6.3101625355063100160200250350400450  
Impedance ratioZ-25℃/Z+20℃4322356  
Z-40℃/Z+20℃8663Bitmap
6
6-  
Impedance (Ω)See case size table  
High Temp. Load Test
高温负荷测试
After application of DC rated working voltage at +105℃, the capacitor shall meet the following limits.
Time6.3 ~ 100 V.DCΦ5、Φ6.3: 3000 hours; Φ8、Φ10: 4000 hours;ΦD≧Φ13: 5000 hours     
160~ 450 V.DC4000 hours;     
             Capacitance change …≦± 20% of the initial measured value          
             Tanδ                           …≦200% of the initial specified value          
             DC leakage current     …≦the initial specified value  
High Temp. Non-Load Test
高温,非负载测试
After storage for 1000 hours at 105℃with no voltage applied, voltage treatment
of JIS-C-5102 article 4-4 is to be given and then measurement shall be made, the         
capacitor shall meet the following limits.               
 WV(D.C.)6.3 ~ 100 V.DC160 ~ 450 V.DC   
 Capacitance change≦± 20% of the initial measured value≦± 20% of the initial measured value   
 Tanδ≦200% of the initial specified value≦200% of the initial specified value   
 DC leakage current≦the initial specified value≦500% of the initial specified value   
  
Note: Some cleaning solvents may adversely affect the capacitors. Consult us about the suitable type of cleaning solvents to be used.