T型线圈·具有体积小、输出电流大、抗杂波性能好、价格低等特点。广泛用于计算机电源、显示器电源、彩电及大功率UPS电源线路上

INPUT VOLTAGE:
90 VAC TO 264 VAC
INPUT CURRENT:
< 2.5 A RMS AT 90 VAC INPUT
INPUT FREQUENCY:
47 HZ - 63 HZ
OUTPUT CURRENT:
NO LOAD TO FULL LOAD, NO MINIMUM LOAD REQUIRED
OUTPUT POWER (RATED):
150 WATTS MAX
OUTPUT RIPPLE (PEAK TO PEAK):
< 1% TYPICAL
ADJUSTABILITY:
+10, -5% MAIN OUTPUT
OUTPUT INDICATOR:
GREEN LED, OUTPUT PRESENT
OUTPUT REGULATION (LINE/LOAD):
+ 2 % FOR MAIN OUTPUT
TURN ON/ TURN OFF OVERSHOOT:
4% MAX 500uS MAX RECOVERY TIME FOR 25% STEP LOAD
TURN-ON DELAY:
1 SEC MAX
HOLD-UP TIME:
20 mSEC MIN AT NOMINAL INPUT 115 VAC AND FULL LOAD
INRUSH CURRENT:
35 A MAX AT COLD START FOR N.A. (50A FOR EURO)
EFFICIENCY:
80% TYPICAL
SWITCHING FREQUENCY:
100 KHZ TYPICAL
OVER-VOLTAGE PROTECTION:
VOLTAGE LIMITED LESS 130% OF NOMINAL VOLTAGE
OVER-CURRENT / SHORT CIRCUIT:
HICCUP WITH AUTO RECOVERY TO 1.1 - 1.3 IO
OTHER PROTECTION:
INPUT FUSING
SAFETY APPROVALS:
ITE MODELS: UR TO UL 60950, C-UR TO 22.2 # 950,
TUV TO EN 60950, CE CLASS I
DIELECTRIC WITHSTAND VOLTAGE:
3000 VAC PRIMARY-SECONDARY;1500 VAC PRIMARYGROUND
LEAKAGE CURRENT:
< 0.5 mA
LINE SURGE:
EN 61000-4-5 LEVEL 4
EMI:
COMPLIES WITH EN55022 AND EN55011, CLASS B AND
FCC PART 15 CLASS B WHEN TESTED WITH A RESISTIVE
LOAD, BOTH CONDUCTED AND RADIATED
CE MARK:
TESTED TO COMPLY WITH EN61000-3-2 EN61000-3-3, AND
EN50082-1, INCLUDING EN61000-4-2 (SYSTEM LEVEL),
EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6,
EN61000-4-11, LEVEL 4. UNIT IS ELIGIBLE FOR CE MARK.
MTBF:
GREATER THAN 200,000 HOURS AT 25° C AMBIENT
TEMPERATURE
OPERATING TEMPERATURE:
0° C TO 40° C
STORAGE TEMPERATURE:
-40° C TO 80° C
HUMIDITY:
MODEL NUMBER CODE:
RT-3: INTERNAL CODE;
-: ITE MODEL, UL 60950
S150: FAMILY DESIGNATION, SINGLE OUTPUT 150W
(P): POWER FACTOR CORRECTION
03 TO 48: OUTPUT VOLTAGE, DC
PFC: ACTIVE POWER FACTOR CORRECTION
NOTES:
1. EACH OUTPUT CURRENT MAY VARY WITHIN IT'S
DESIGNATION RANGE, AS
LONG AS OUTPUT POWER IS NOT EXCEEDED.
2. SINGLE OUTPUT UNITS ARE AVAILABLE FROM 3.3V UP TO
48V IN 0.1V INCREMENTS.
3. (X.X) OPTIONAL FOR SPECIFYING OUTPUT VOLTAGE
DEVIATION FROM STANDARD MODEL. SUBTRACTING X.X
VOLTS FROM STANDARD OUTPUT VOLTAGE.