产品详情大图
『泰克经销』现货原厂示波器电流探头 Tektronix TCP0150
价格：电议
地区：江苏 苏州市
电 话：86 0512 65090040
传 真：86 0512 65090042

苏州众业电子有限公司

免费会员 营业执照未上传

>
全部产品 进入商铺

Features & Benefits

  • Easy-to-Use and Accurate AC/DC Current Measurements
  • Connects Directly to Oscilloscopes with the TekVPI™ Probe Interface
  • DC to 20 MHz Bandwidth
  • 150 ARMSMaximum Current Capability
  • 500 A Peak Pulse Current Capability
  • High Accuracy with Typically Less Than 1% DC Gain Error
  • Accurately Measures Current levels as Low as 5 mA
  • Low Noise and DC Drift
  • Provides Automatic Units Scaling and Readout on the Oscilloscope's Display
  • Remote GPIB/USB Probe Control through the Oscilloscope
  • Split-core Probe Head Construction Allows Easy Connection to Conductors
  • Easy to Degauss and Autozero
  • Setup Controls and Probe Status and Diagnostic Indicators are Provided on Both the Probe Hardware and through an Easy-to-Access Scope UI Display Menu

Applications

  • Power Supplies
  • Semiconductor Devices
  • Power Inverters/Converters
  • Electronic Ballasts
  • Industrial/Consumer Electronics
  • Motor Drives
  • Transportation Systems

 

TCP0150 is a high performance and easy-to-use 150 A AC/DC current probe designed for use and direct connection to the TekVPI™ probe interface. This AC/DC current measurement probe provides 20 MHz of frequency bandwidth with selectable range control for 25 A and 150 A measurement ranges. It also provides low-current measurement capability and accuracy to current levels as low as 5 mA per division – important for achieving broad dynamic current range of high-level and low-level measurement signals.

Characteristic

Description

Bandwidth

DC to ≥20 MHz (-3 dB). Derate with Frequency. See Figure 1. (Calculated from Rise Time BW = .35/Rise Time)

Rise Time

≤17.5 ns

Max RMS Current

150 A

Max Peak Pulse Current

500 A

Minimum Sensitivity

5 mA (on oscilloscope’s 1 mV/div setting)

AC Coupling (on oscilloscopes that support AC/DC coupling)

Current Ranges

25 A and 150 A

Max Bare-wire Voltage

600 VRMSCAT I and II

300 VRMSCAT III

Typical

Characteristic

Description

DC Accuracy

±1% Typical

3% Warranted

Max Amp-second Product

   25 A Range

3,000 Aµs

   150 A Range

15,000 Aµs

Insertion Impedance

0.03 Ω at 1 MHz

0.075 Ω at 5 MHz

.125 at 10 MHz

.3 at 20 MHz

Signal Delay

 21 ns

Displayed RMS Noise

≤500 μARMS(probe only)

Environmental

Characteristic

Description

Temperature

   Operating

0 ºC to +50 ºC

   Nonoperating

-40 ºC to +75 ºC

Humidity

   Operating

5% to 95% RH (Relative Humidity) at up to +30 ºC

5% to 85% RH above 30 ºC up to +50 ºC, noncondensing

   Nonoperating

5% to 95% RH (Relative Humidity) at up to +30 ºC

5% to 85% RH above 30 ºC up to +75 ºC, noncondensing

Altitude

   Operating

Up to 2,000 meters (6,560 feet)

   Nonoperating

Up to 12,000 meters (40,000 feet)

Physical Characteristics

Dimension

Meters

Inches

Cable Length

2 meters

79 in.

Probe head size

   Length

26.8 cm 

10.55 in.

   Width

4.1 cm

1.6 in.

   Height

15.6 cm

6.13 in.

Max Conductor Diameter

21 mm x 25 mm

0.83 in. x 1.0 in.

Weight

kg

lb.

Shipping

.7865

1.734

Power Requirements

TCP0150 is powered directly by oscilloscopes with the TekVPI interface

Recommended Oscilloscopes

Oscilloscopes with the TekVPI probe interface.

Note: For best probe support, download and install the latest version of the oscilloscope software fromwww.tektronix.com


Figure 1.


Figure 2.


Figure 3: Do not apply currents greater than the max continuous current for more than 10 seconds to minimize heating effects.