产品详情大图
林肯焊机（Lincoln）电流表
价格：电议
地区：
电 话：0086 21 52680977
手 机：13611714812
传 真：86 021 51564138-168

上海务华焊割工程设备有限公司

免费会员 营业执照未上传

>
全部产品 进入商铺

供应林肯（Lincoln）电流表M10485-8

 

M10486-3 /-4

LN23P 送丝机表 DC-40V

NA3S 控制器表 DC-60V/100V  DC-1500A

DC-1000 电源 电流表 DC-1300A  / 电压表DC-60V

DC-600 电源 电流表 DC-800A  / 电压表DC-60V

DC-400 电源 电流表 DC-600A  / 电压表DC-60V

 

IDEALARC DC-1000
Multi-Process Welder
K1387-3 Idealarc DC/380/440/3/50/60

If your application requires pure welding power combined with multi-process power, then the DC-1000, with 1300 amps of smooth DC ouput, is your best investment.
Designed for semiautomatic and automatic welding, the precise control of the DC-1000 delivers superior high amperage MIG, flux-cored, submerged arc welding and air carbon arc gouging with up to 5/8" (15.9 mm) diameter carbons.


Advantage Lincoln
  • 500 amp output connections provide enhanced arc characteristics for low amperage submerged arc and MIG welding procedures.
  • Single range control for precise output control and easy operation.
  • Standard analog ammeter and analog voltmeter.
  • Use the mode switch to select the desired output characteristics for the process being used – CV Submerged Arc, CV Innershield®, CC Submerged Arc.
  • Power start/stop push button (NVR) switches with pilot light.
  • Fuse protected 115V wire feeder auxiliary power with 1000 volt-amp capacity.
  • Terminal strip and output studs for remote connections and cable.
  • Low profile case allows installation of the DC-1000 under a workbench and for stacking up to 2 machines to conserve floor space.
  • Removable side panels for easy access to internal parts.
  • Line voltage compensation maintains weld consistency, even with line voltage changes of ±10%.
  • Electronic and thermostatic protection from current overload and excessive temperatures.
  • Internal components, including windings, rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion.
  • Recessed front panel protects operating controls