苏州洁明水处理技术有限公司

我公司Y型隔膜阀气动控制或液动控制均可.

My company Y type diaphragm valve pneumatic or hydraulic control.

1. Y型隔膜阀的属性;

1. The attribute of Y type diaphragm valve;

材质: 阀体及阀盖为玻纤加强NORYL(PPO)材料,膜片为增强橡胶(三元乙丙橡胶EPDM);

Material: body and cover for the glass fiber reinforce NORYL material (PPO), diaphragm to strengthen rubber EPDM (EPDM);

颜色:黑色;

Color: black;

重量:阀体大小不一,下面会列出表格

Weight: the body sizes, listed below form

连接方式:粘接和法兰

Connection mode: bonding and flange

驱动方式:气动和液动均可

Driving mode: pneumatic and hydraulic

适用介质:水

Applicable medium: water,

使用温度:1-60度

The temperature of use: 1 to 60 degrees

使用压力:0.15-0.8MP

Use pressure: 0.15-0.8 MP

2. Y型隔膜阀规格;

2. Y type diaphragm valve specifications;

3. Y型隔膜阀的原理;

3. The principle of Y type diaphragm valve;

关闭阀门：将控制压力源（水源或气源，压力等于或大于来水压力）引至隔膜上控制腔，隔膜通过阀杆推动阀座，从而截断来水关闭阀门。

Close the valve, the control pressure source (water or gas source, the pressure is equal to or greater than water pressure) control the cavity to the diaphragm, diaphragm through stem drive seat, thereby blocking water close the valve.

开启阀门：当隔膜上腔压力泄压后，来水通过自身压力推开阀杆，从而很容易形成通腔，使流体通过。

Open valve: when the diaphragm chamber pressure, pressure, water through its own pressure push the valve stem, thus it is easy to form a cavity, the flow through.

4. Y型隔膜阀的应用范围;

4. The application scope of Y type diaphragm valve;

Y型隔膜阀可应用的产业:

Y type diaphragm valve applicable industry:

酸性： 强酸、弱酸……

Acid, strong acid and weak acid...

航太工业、金属处理（表面酸洗处理）、阳极处理、 电镀处理、矿业（含硫）、镀锌、金属电镀等！

The aerospace industry, metal processing (surface pickling treatment), anodizing, electroplating processing, mining (sulfur), galvanized, metal plating, etc.

碱性： 强碱、弱碱、腐蚀剂……

Alkaline: strong alkali, weak alkali, etch...

纸浆及造纸（二氧化氯、次氯酸钠、硫酸……）

Pulp and paper (chlorine dioxide, sodium hypochlorite and sulfuric acid...)

、 金属电镀、化学处理、氯碱工业、空气污染、饮料工业等！

, metal plating, chemical processing, chlor-alkali industry, air pollution, beverages industry etc.

水处理：制药、纺织业、皮革处理业、纯水处理、电子工业（印刷电路板）、污水废水处理、海事工程、商业建筑等！

Water treatment, pharmaceutical, textile, leather processing industry, water treatment, electronics (PCB), sewage wastewater treatment, Marine engineering, commercial buildings, etc.!

5. Y型隔膜阀的特点;

5. The characteristics of Y type diaphragm valve;

Y型隔膜阀使用特点:

Y type used diaphragm valve features:

耐酸碱、耐腐蚀、耐冲击、耐热性之强化塑胶制品！

Acid and alkali resistance, corrosion resistance, impact resistance, heat resistance of the reinforced plastic products!

Y型隔膜阀工作特点

Y type diaphragm valve working characteristics

1.Y型隔膜阀采用上下双控制腔设计，控制水流独立于流体腔室，从而使阀门控制上更加灵活、可靠耐用，彻底杜绝了单腔控制阀可能存在的开关不灵、不严的隐患。

1. Y type diaphragm valve adopts double control cavity design, control flow is independent of the fluid chamber room, so that the valve control more flexible, reliable, durable, completely put an end to the single cavity valve possible switch is ineffective, lax hidden trouble.

2.阀体及阀盖为玻纤加强NORYL材料(PPO)，阀门强度高、使用寿命长、耐腐蚀。

2. The body and bonnet for glass fiber strengthen NORYL material (PPO), valve with high intensity, long service life, resistant to corrosion.

3.特殊处理成型的增强橡胶隔膜片(三元乙丙橡胶EPDM），使用寿命长，抗疲劳强度高。

3. Special processing molding reinforced rubber diaphragm EPDM (EPDM), long service life, high fatigue strength.

4.Y形的流体通道设计降低了阀门的压力损失，提高了水通量。

4. Y fluid channel design reduces the pressure loss of valve, improves the water flux.

5.常开型与常闭型可轻松实现灵活转换。

5. Normally open and normally closed type can easily implement flexible transformation.

6.可增加弹簧辅助开（关）、流量限制或开关显示等功能。

6. Can increase the spring assisted on (off), traffic limit or switch display, etc.

7.Y型隔膜阀 用气压控制也可用液压控制,但阀体前都要加装两位三通电磁阀.如使用我公司的JMA多阀控制器则可直接使用,不需要电磁阀

7. Y type diaphragm valve with pneumatic control also can use hydraulic control, but before the valve body is equipped with two the 3-way magnet valve (pos. If use my company's JMA valve controller can be used directly, more do not need to electromagnetic valve

6. Y型隔膜阀的保养和维护;

6. Y type diaphragm valve maintenance and maintenance;

Y型隔膜阀的设计如正常按要求使用,阀体基本不会损坏(除人为损坏),膜片一般寿命也达到十年之久,膜片坏了也只需要更换膜片,无需换掉整个隔膜阀.本公司Y型隔膜阀出厂都有一年保修(除人为损坏),不过到目前为止都还没出现过保修的情况,足以说明Y型隔膜阀的质量了.

Y type diaphragm valve design such as normal use according to the requirement, and the body basic will not damage (except artificial damage), diaphragm life also reached ten years commonly, diaphragm is bad also only need to replace the diaphragm, without having to replace the diaphragm valve. The company Y type diaphragm valve factory has one year warranty (except artificial damage), but so far haven't seen the warranty, enough to illustrate the quality of Y type diaphragm valve.