产品品牌：

TECHNIX

产品型号：

7500-20000J/s CCR系列

法国TECHNIX高压充电电源，主要作为高压电容器以及MARX发生器等设备的充电电源。

These chargers constitute the high end range. Double Resonance Technology operating at high frequencies (50 kHz) offers a smooth switching to all the critical components and provides them a non-stressing behaviour.

Internal power dissipation, harmonics & ripple are significantly reduced.

Hence, they can operate without damage or interruption in rugged environments Many of them are used at full power 24 h/day, 7 days/week with no failure for many years. Four ranges of charge rates are offered in this series from 7.5 kJ/s to 20 kJ/s.

For higher charge rates, they can be configured to run in master/slave mode to reach 50 kJ/s and more.

An oil tank is integrated for the models from 20 kV and more.

• Voltage & Current Ouputs continuously adjustable from 0 to full scale
• Low stored energy
• High Efficiency
• Total protection against arcs, overloads and short circuits
• Customized V and C full scales* with no extracost
• V & C Setting and Monitoring from front panel or REMOTE
• High precision regulation
• Remote, Inhibit & Interlock functions
• High reliability
• Compact design
• Double Resonance Technology (ZVC)
• Automatic crossover
• Over Current Limitation and Protection functions
• Polarity display
• Safety switch key
• Master-slaves architecture allowing to go beyond 40 kW

* You can choose your own full scales (Vmax and Imax) even if these values are not available in standard. For example, you can get a 15 000 V generator based on 30 000 W model. In this case, you will get an Output Voltage adjustable from 0 to 15 000 V and an Output Current from 0 to 2 A.

Output Voltage and Output Current:

Both Voltage Output and Current Output are continuously adjustable from 0 to 100 % (full scale).
In local mode: by using 10 turns potentiometers resolution 0.05%
In remote mode: by an external 0 to 10 V

Voltage regulation

Load Regulation: ±0.05 % of full voltage (for 0 - 100 % load change); ±0.01% available on request.
Line Regulation: ±0.05 % of full voltage ( for Main Voltage ±10 %); ±0.01% available on request.

Current regulation:

Load Regulation: ± 0.05 % (for 0 - 100 % load change)
Line Regulation: ± 0.05 % (for Main Voltage ± 10 %)

Ripple + Noise:

0.1 % p-p
0.1% RMS for single phase models

Setting Time:

< 100 ms, 10 ms available on request

Stability (after one hour warm-up):

0.01 % / hour, 0.03 % after / 8 hours of operating with constant load and ambiant temperature.

Temperature Coefficient:

100 ppm/°C

Operating Temperature:

from 0 to 40°C

Efficiency:

> 92 % full load

Recovery Time After Arc:

< 1 mS

Stored Energy:

1J / kW

Cooling by air:

Dust filter fans on front panel. Easily removable filters for cleaning.

Main Voltage:

400 VAC ± 10 % 47 - 63 Hz 3 Phases + Earth from 1500 W

Power factor:

> 0.98

Calibrations:

with probes periodically approved by Authorized Measurement Laboratories

CE Marking