产品详情大图
培养摇瓶SHAKE FLASKS
价格：电议
地区：上海市

上海君翼仪器设备有限公司

免费会员 营业执照已上传

>
全部产品 进入商铺
培养摇瓶SHAKE FLASKS:

各种款式摇瓶SHAKE FLASKS，适用于微生物等培养，一般是实验室水平的发酵，发酵量较小，用于实验通途。也是大型发酵前期种子培养的方式。

CLS-2040

SHAKE FLASKS, 3 STANDARD BAFFLES, REINFORCED TOP

Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker.

Item Number

Item Description

PQ

CLS-2040-01

Flask, Shake, 125mL, Baffled, Plain Top, Approx OD x Height (mm): 70 x 115

EACH

CLS-2040-02

Flask, Shake, 250mL, Baffled, Plain Top, Approx OD x Height (mm): 80 x 135

EACH

CLS-2040-05

Flask, Shake, 1000mL, Baffled, Plain Top, Approx OD x Height (mm): 130 x 215

EACH

CLS-2040-07

Flask, Shake, 2000mL, Baffled, Plain Top, Approx OD x Height (mm): 155 x 270

EACH

CLS-2042

SHAKE FLASKS, 3 DEEP BAFFLES, REINFORCED TOP

Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker.

Item Number

Item Description

PQ

CLS-2042-02

Flask, Shake, 250mL, Deep Baffles, Plain Top, Approx OD x Height (mm): 80 x 135

EACH

CLS-2042-04

Flask, Shake, 500mL, Deep Baffles, Plain Top, Approx OD x Height (mm): 100 x 180

EACH

CLS-2042-05

Flask, Shake, 1000mL, Deep Baffles, Plain Top, Approx OD x Height (mm): 130 x 215

EACH

CLS-2042-07

Flask, Shake, 2000mL, Deep Baffles, Plain Top, Approx OD x Height (mm): 155 x 270

EACH

CLS-2044

SHAKE FLASKS, 3 STANDARD BAFFLES, DELONG NECK

Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.

Item Number

Item Description

PQ

CLS-2044-01

Flask, Shake, 50mL, Baffled, Delong Neck, Approx OD x Height (mm): 50 x 110

EACH

CLS-2044-02

Flask, Shake, 125mL, Baffled, Delong Neck, Approx OD x Height (mm): 70 x 145

EACH

CLS-2044-03

Flask, Shake, 250mL, Baffled, Delong Neck, Approx OD x Height (mm): 80 x 155

EACH

CLS-2044-05

Flask, Shake, 500mL, Baffled, Delong Neck, Approx OD x Height (mm): 100 x 200

EACH

CLS-2044-06

Flask, Shake, 1000mL, Baffled, Delong Neck, Approx OD x Height (mm): 130 x 230

EACH

CLS-2044-08

Flask, Shake, 2000mL, Baffled, Delong Neck, Approx OD x Height (mm): 155 x 300

EACH

CLS-2046

SHAKE FLASKS, 3 DEEP BAFFLES, DELONG NECK

Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.

Item Number

Item Description

PQ

CLS-2046-01

Flask, Shake, 50mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 50 x 110

EACH

CLS-2046-02

Flask, Shake, 125mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 70 x 145

EACH

CLS-2046-03

Flask, Shake, 250mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 80 x 155

EACH

CLS-2046-05

Flask, Shake, 500mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 100 x 200

EACH

CLS-2046-06

Flask, Shake, 1000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 130 x 230

EACH

CLS-2046-08

Flask, Shake, 2000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 155 x 300

EACH

CLS-2046-09

Flask, Shake, 3000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 185 x 340

EACH

CLS-2046-10

Flask, Shake, 4000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 205 x 370

EACH

CLS-2048

SHAKE FLASKS, 6 BAFFLES, DELONG NECK

Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.

Item Number

Item Description

PQ

CLS-2048-04

Flask, Shake, 250mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 80 x 155

EACH

CLS-2048-05

Flask, Shake, 500mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 100 x 200

EACH

CLS-2048-06

Flask, Shake, 1000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 130 x 230

EACH

CLS-2048-08

Flask, Shake, 2000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 155 x 300

EACH

CLS-2048-09

Flask, Shake, 3000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 185 x 340

EACH

CLS-2048-10

Flask, Shake, 4000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 205 x 370

EACH

CLS-2050

SHAKE FLASKS, 4 BAFFLES, CONSTRICTION, DELONG NECK

Flask has 4 bottom baffles and a constriction just below the neck to prevent splashing from reaching the closure.

Item Number

Item Description

PQ

CLS-2050-02

Flask, Shake, 250mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height (mm): 80 x 155

EACH

CLS-2050-04

Flask, Shake, 500mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height (mm): 100 x 200

EACH

CLS-2050-06

Flask, Shake, 1000mL, 4 Baffles, Constriction, Delong Neck, Approx OD x Height (mm): 130 x 230

EACH

CLS-2051

SHAKE FLASKS, 3 BAFFLES, GL THREAD, VENTED CAP

Flask has 3 baffles on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. The polypropylene vented caps have a 0.22μm (PTFE) hydrophobic membrane to allow sterile gas exchange while preventing contamination. Since these caps are vented, the flasks can be autoclaved with the cap attached.

Item Number

Item Description

PQ

CLS-2051-02

Flask, Shake, 125mL, 3 Baffles, GL-32 Thread, Vented Cap, Approx OD x Height (mm): 65 x 120

EACH

CLS-2051-04

Flask, Shake, 250mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 80 x 125

EACH

CLS-2051-06

Flask, Shake, 500mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 100 x 170

EACH

CLS-2051-08

Flask, Shake, 1000mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 130 x 215

EACH

CLS-2051-10

Flask, Shake, 2000mL, 3 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 170 x 270

EACH

CLS-1484-10

Cap, GL-45, Vented, Gray, Non-Sterile

CLS-2052

SHAKE FLASKS, 6 BAFFLES, GL-45 THREAD, VENTED CAP

Flask has 6 baffles, 3 baffles on the lower outside edge of the flask and 3 baffles on the bottom surface of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Gray polypropylene vented cap has a 0.22μm (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap attached.

Item Number

Item Description

PQ

CLS-2052-04

Flask, Shake, 250mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 80 x 125

EACH

CLS-2052-06

Flask, Shake, 500mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 100 x 170

EACH

CLS-2052-08

Flask, Shake, 1000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 130 x 215

EACH

CLS-2052-10

Flask, Shake, 2000mL, 6 Baffles, GL-45 Thread, Vented Cap, Approx OD x Height (mm): 170 x 270

EACH

CLS-1490

CLOSURES, SILICONE SPONGE

The silicone sponge closure is manufactured with a sealed in .2 micron silicone sponge filter. Flange fits snugly over the necks of vessels permitting the exchange of gases, while reducing evaporation and preventing the passing of aerosols. Ideal for use with aerobic cultures. Reusable, autoclavable and will withstand dry heat sterilization up to 180°. Closure will withstand both dry heat sterilization and repeated autoclaving.

CLS-1490-013 fits: 13-18mm Culture Tubes and 18mm Screw Necks
CLS-1490-020 fits: 18-25mm Culture Tubes, 25-50mL Erlenmeyer Flasks and 25-125mL Delong® Flasks
CLS-1490-028 fits: 125 and 250mL Erlenmeyer Flasks
CLS-1490-038 fits: 38mm Delong® Style Flask or Tube Necks, 38mm Culture Tubes, 500 and 1000mL Standard Erlenmeyer Flasks and GL-45 Screw Threads

Item Number

Item Description

PQ

CLS-1490-013

Closure, Silicone Sponge, 13mm

P10

CLS-1490-020

Closure, Silicone Sponge, 20mm

P10

CLS-1490-028

Closure, Silicone Sponge, 28mm

P10

CLS-1490-038

Closure, Silicone Sponge, 38mm

P10

CLS-1502

CLOSURES, STAINLESS STEEL

These closures are made from 305 Stainless Steel. They are ideal for use with culture tubes and flasks utilizing Delong Necks. The closure is designed with finger grips to allow it to fit firmly on any Delong Neck. It will withstand both dry heat sterilization and repeated autoclaving.

Item Number

Item Description

PQ

CLS-1502-018

Closure, 18mm, Stainless Steel

P10

CLS-1502-025

Closure, 25mm, Stainless Steel

P10

CLS-1502-038

Closure, 38mm, Stainless Steel

P10

CLS-1503

CLOSURES, POLYPROPYLENE

Delong style closure made of polypropylene. Closure offers two positions, open for gas exchange or closed for humidified environment. Internal drip ring minimizes contamination. Autoclavable to 121°C.

Item Number

Item Description

PQ

CLS-1503-09

Closure, 25mm, Polypropylene

P10

CLS-1503-10

Closure, 38mm, Polypropylene

P10

CLS-1480

CAPS, SOLID, GL-THREADS, POLYPROPYLENE

Solid polypropylene caps with a molded in lip seal. All color caps can be autoclaved in steam to 140°C.

The Premium Clear Caps are made from TpCh260 (similar to PFA) with PTFE coated silicone seal. Premium Cap Compound is formulated without colour dye to avoid risk of leaching. Premium caps can be used in temperatures from -196° to 260°C.

Item Number

Item Description

PQ

CLS-1480-10

Cap, GL-25, Blue, Solid, Polypropylene

P10

CLS-1480-11

Cap, GL-32, Blue, Solid, Polypropylene

P10

CLS-1480-12

Cap, GL-32, Orange, Solid, Polypropylene

P10

CLS-1480-13

DISCONTINUED: PLEASE SEE CLS-1480-13SC
            Cap, GL-45, Blue, Solid, Polypropylene

 

CLS-1480-13SC

Cap, GL-45, Schott Blue, Solid, Polypropylene

P10

CLS-1480-14

Cap, GL-45, Gray, Solid, Polypropylene

P10

CLS-1480-15

Cap, GL-45, Green, Solid, Polypropylene

P10

CLS-1480-16

Cap, GL-45, Orange, Solid, Polypropylene

P10

CLS-1480-17

Cap, GL-45, Purple, Solid, Polypropylene

P10

CLS-1480-18

Cap, GL-45, Yellow, Solid, Polypropylene

P10

CLS-1480-19

Cap, GL-45, Clear, Solid, Made From TpCh260

(similar to PFA) with PTFE coated silicone seal.

Compound formulated without colour dye to

avoid risk of leaching.

PK5

CLS-1481

CAPS, OPEN TOPS, GL-THREADS, POLYPROPYLENE

Open top polypropylene caps for use with port assemblies. Caps can be autoclaved in steam to 140°C.

Item Number

Item Description

PQ

CLS-1481-20

Cap, GL-32, Blue, Open Top, Polypropylene

P6

CLS-1481-21

Cap, GL-45, Blue, Open Top, Polypropylene

P6

CLS-1481-22

Cap, GL-45, Green, Open Top, Polypropylene

P6

CLS-1481-23

Cap, GL-45, Yellow, Open Top, Polypropylene

P6

CLS-1482

POURING RINGS

Steam autoclavable to 140°C. All pouring rings are polypropylene except for the CLS-1482-30 which is made of high temperature ETFE (Ethylene Tetrafluoroethylene); max temp is 180°C.

Item Number

Item Description

PQ

CLS-1482-11

Pouring Ring, GL-32, Blue, Polypropylene

P10

CLS-1482-12

Pouring Ring, GL-32, Clear, Polypropylene

P10

CLS-1482-13

Pouring Ring, GL-45, Blue, Polypropylene

P10

CLS-1482-14

Pouring Ring, GL-45, Green, Polypropylene

P10

CLS-1482-15

Pouring Ring, GL-45, Gray, Polypropylene

P10

CLS-1482-16

Pouring Ring, GL-45, Yellow, Polypropylene

P10

CLS-1482-17

Pouring Ring, GL-45, Clear, Polypropylene

P10

CLS-1482-30

Pouring Ring, GL-45, Red, ETFE

P10

CLS-1484

CAPS, VENTED, POLYPROPYLENE, NON-STERILE

Polypropylene vented cap has a 0.22μm (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C.

Item Number

Item Description

PQ

CLS-1484-25

Cap, GL-25, Blue, Vented, Non-Sterile, Polypropylene

PK5

CLS-1484-32

Cap, GL-32, Blue, Vented, Non-Sterile, Polypropylene

PK5

CLS-1484-10

Cap, GL-45, Gray, Vented, Non-Sterile, Polypropylene

EACH

CLS-1484-12

Cap, GL-45, Blue, Vented, Non-Sterile, Polypropylene

PK5

CLS-1486

HIGH TEMPERATURE CAPS, SOLID, PBTE, PTFE SEALS

High temperature PBTE cap will withstand temperature from -45 to 200°C. Complete with PTFE seal.

Item Number

Item Description

PQ

CLS-1486-01

High Temperature Cap, GL-32, Solid, PBTE

EACH

CLS-1486-02

High Temperature Cap, GL-45, Solid, PBTE

EACH

品牌/商标

美国Chemglass