gabo EPLEXOR ^; DMA / DMTS动态热机械分析仪

^{gabo EPLEXOR;} 500 N

gabo EPLEXOR 500 N 动态热机械分析仪

The gabo EPLEXOR^; 500 N High End combines the dynamicmechanic thermal analysis with the dynamic material testing for thedetermination of the absolute values of the E modulus.

Further fields of application are:

• DMA/DMTA/DMTS

• Dynamic component testing

• Durability tests

• Analysis of the visco-elastic material properties

• Dynamic fatigue testing

• Relaxation and retardation

• - creep testing - (optional) Tests in liquids     (optional)

• Tests among UV light (optional)

• Tests in humid atmosphere (optional)

• Prediction of application properties

• Materials research

• Impact tests

The upgradable Automatic Sample SupplySystem (ASSS) with a sample dimension measurement station guarantees a bestpossible sample capacity during investigations in the entire temperature rangeof -150 °C to 500 °C (option).

CHARACTERISTICS:

The only DMTS system with twoindependent drives for the static and dynamic load.

A static load up to 1500 N is possible,a dynamic drive up to 500 N.

The large high force capacity enablescompression and shear tests on Dumbell specimen.

Through the higher force range it isespecially applicable for curable plastics, composites or elastomers.

A premium system in its class.

• Absolute values of deformation, force, initial     sample length L0 and temperature.

• Determination of the following material properties:     E’, E”, G’, G”, η”, η’, tan delta (depends on the used sample holder).

• Storage of the raw data.

• Dynamic testing of polymers, elastomers,     caoutchoucs, rubbers, biological materials, glasses, ceramics, metals,     foils, fibres, tyre cords, resins, adhesives, prepregs, composites,     lacquers, coatings, food-stuffs, pharmaceuticals and much more.

• Changeable force transducers.

• Changeable sample holders.

• Automatic Sample Supply System (ASSS) for tension,     compression and bending samples within the entire temperature range,     including sample dimension determination (option).

• Simultaneous DMA/DMTS and TMA application.

• Control and measurement analysis, alternatively in     the procedure of FFT (Fast Fourier Transformation), Least Square Fit or     hysteresis.

• Time, temperature, superposition (mastercurves) -     WLF, Arrhenius, numerical methods.

• Extensive software package (data and curve     analysis), spline functions, 3D-plots and Cole-Cole diagrams.

• Predictive testing for the simulation of the rolling     resistance on automobile tires.

• Components testing.

• Dumbell durability tests.

• Heat build-up tests but with restricted force and     deformation range (see EPLEXOR® 2000 N and 4000 N).

SPECIFICATIONS