产品详情大图
高频噪音模拟器 INS-4020/4040
价格：电议
地区：
电 话：86 0755 29231319
传 真：86 0755 29231319

深圳市声仪科技有限公司

免费会员 营业执照未上传

>
全部产品 进入商铺

IMPULSE NOISE SIMULATOR
INS-4020/4040

For additional product information, please download the INS series brochure.INS-2005.PDF (1516KB)

Options
Injection unit



FEATURES


Impulse Noise Simulator INS-4020/4040 are more convenient and user-friendly than former models, thanks to the following features.

  • Push button setting for all parameters
  • Terminal block outlet panel
  • Sweep operation for output voltage, phase angle and repetition cycle
  • Up to 5 test settings stored in the momory
  • Floating output
  • Coupling mode selection by plugging the supplied coaxial connector to the selected port
  • Easily changeable mercury relay
  • Built-in 50 ohm terminator
  • Easily changeable outlet panels
  • CE marked


SPECIFICATIONS


ItemModel
INS-4020 (2kV)INS-4040(4kV)
Output voltage0.01 ~ 2.00KV ±10% with 50 ohm load, 10V step, Sweep mode available0.01 ~ 4.00KV ±10% with 50 ohm load, 10V step, Sweep mode available
PolarityPositive or negative
Square wavePulse width50ns, 100 ns, 200ns, 250ns, 400ns, and any combination thereof, maximum width, 1µs or 10ns±3ns (the shortest connection)
Pulse rise time< 1ns
Output impedance50 ohmsystem (53.5 ohm)
Pulse repetition modeVariable10ms~ 999ms±10%, 1ms step
Sweep operation available		16ms ~ 999ms±10%, 1ms step
Sweep operation available
Line phase50 or 60Hz, Injection phase angle 0~359°, 1° step
Sweep operation available
External<EXT mode>
>10ms, Pulse width>1ms
TTL/Open collector negative logic
<EXT mode>
>16ms, Pulse width>1ms
TTL/Open collector negative logic
Also functions for timing reference signals input from an external injection unit
1 shotSingle pulse injection to the angle which is specified by Line phase setting on the power line, or Single shot without injection power line.
MemoryUp to 5 test settings
Power capacity of equipment under testAC 240V, DC60V, Single phase, DC60V 16A
Power supplyAC100~ 240V 50/60H
Power consumption140VA
Operating temperature and humidity15~35°C / 25~75% (No dewing shall occur.)
Dimensions(W) 430 X (H) 249 X (D) 420 mm(Projections excluded)
WeightApprox. 19kgs

Included accessories
  • Coaxial cable Model: 02-00013A (8 pcs)
    • 30 cm length
  • SG short plug Model: 02-00106A (1pc)
  • Outlet panel Model: 18-00061B (1 pc)
    • Terminal block type
    • AC240V/16A DC60V/16A maximum
    • Leaves the factory with this panel attached to the main unit (INS-4020 or INS-4040)
  • AC cable (1pc)
    • AC100-115V 3-p, 2.4m
  • Instruction manual (English / 1 pc)



Option: Injection unit Model: IJ-4050                    Other options

The built-in injection circuitry has 16A rating for single-phase AC. For test exceeding this current limit or 3-phase application, IJ-4050 shall be used.

This optional unit can extend the EUT supply voltage and current ratings up to 3-phase AC 415V/50A. In conjunction with INS-4020/4040, this unit can operate in the EUT Line Synchronization mode.


SPECIFICATIONS


ItemModel IJ-4050
Impulse input8kV max when the INS-4020/4040 output is not terminated.
EUT power capacity3-phase, 5-wire (L1, L2, L3, N, PE) AC415V, 50A
Coupling mode selectionBy short plug connection
Zero cross detectionDetects L1-L2 voltage and outputs synchronization signal from the SYNC OUT connector
Dimensions and weight(W)430 x (H) 200 x (D) 535 mm (Projections excluded)
Approx. 25.0 kgs