-
图文详情
-
产品属性
-
相关推荐
德国PTL弯曲试验旋转机 F39.41进口弯曲试验机 供应德国进口弯曲试验机
PTL 弯曲试验旋转机F39.4X系列制造三个型号.满足标准:IEC60745-1和IEC60227-2
PTL 弯曲试验旋转机F39.4X系列制造三个型号.他们在样品的当前加载种类不同.全部型号对1个或者2个试样的机械性能试验,旋转角度多变
±22,5° ±45°和 ±90°,旋转频率从0.3Hz到1Hz可调
PTL Flexing Test Swivel Machines F39.41
for mechanical tests of 1 or 2 samples, swivel
angle changeable to ±22,5° ±45°and ±90°, swivel
frequency adjustable from 0,3 Hz to 1 Hz
1 Rigid housing, made as weldment of
steel profiles and rectangular steel tubes with
metal sheet covering
1 protective window with safety switch inside
to cover the swivel angle adjustment and the connecting rod
Chassis to accommodate the control unit, with front panel, with the components (all models):
1 main switch with “Emergency Stop” function to witch the power for the machine on and off, 1 or 3 pilot lamps for mains voltage on, fuses for the control unit, for the drive motor and for the phases of the test voltage (not at F 39.41)
1 frequency indicating instrument and rotary knob to adjust the frequency of the swivelling head motion from approx. 0,3 to 1Hz
1 predetermining counter, 6 digits
1 green push-button "I" to start the drive unit, 1 red push-button "O" to stop the drive unit, 1 blue push-button switch "Inching" for setting the swivel head
Drive unit for the swivelling movement (all models)
1 Electric geared motor mounted on motor plate,
drive gearwheel made of nylon, with slip friction
clutch with spring-loading discs to adjust the friction
force of the clutch, reduction gearwheel with two
bearings inside the hub;
1 crank disk with slot and set bores to cause output
shaft motion by ±22,5° ±45°and ±92°, hexagon screw
with fixed sleeve matching to the set bores for fixing
the connecting rod, sensor which transmits a pulse to the counter at every swivelling movement;
1 back gear assembly with axle, fixed to the housing, and gearwheel with 2 bearings inside the hub and with bore hole for the connecting rod;
1 hollow output shaft with 2 bearing units, with welded flange to fix the swivel head or other adapters, gearwheel to double the movement of the back gear shaft, fixed to the output shaft by a clamping connection-by this, a turning of the shaft relative to the gearwheel is possible;
1 connecting rod, to turn the rotating movement of the crank disc to the swivelling movement of the back gear, with bearing heads on each end.
unit and swivel head for fixing the samples (all models)
The output shaft flange is fitted with a square shaped
pattern of threaded bore holes. Here, any kind of
fixtures can be mounted.
A slide unit is standard outfit. It is mounted to the
output shaft flange by means of 2 clamp bars.
Here, too, any kind of fixtures can be mounted,
now with possibility for coarse and fine adjustment
of the hight.
For any kind of plugs or couplers, a swivel head is standard outfit. Fitted with bushings and fitting plates, 2 adapters with diameter 48 mm can be fixed. The swivel head allows to turn the samples by 90°very quickly.
1 Slide unit, with spindle for fine adjustment of the height, lead 1 mm, with 2 clamp bars for coarse height adjustment, can be mounted at a turn of 90? too
1 Swivel head, mounted on the support of the slide unit with swivel main plate, with 2 bushings, inner diameter 48 mm, for carrying the adapters F 39.7X and with 2 fitting plates for right angle plugs, dismountable, with bores, inner diameter 48 mm, too. 2 arresting pins, for arresting the bushings at two positions, which are turned by 90°
Guidance for the samples and Loading weights (all models)
1 Metal plate, with elongated holes of 15mm x 45mm
as guides, with 4 Distance rods, which support the metal
plate at a distance of 250 mm underneath the swivelling
axis. As there are some standards, which prescribe
guides 300 mm underneath the swivelling axis, the metallic
distance rods, which are 50 mm long, can be dismount.
2 Frames according to further prescriptions; detachable
for the case, that they are not needed
2 Sets of weights for sample loads from 5 N to 60 N,
that means from approx. 0,5 kg to approx. 6,0 kg, with
each 1 weight carrier 5 N with clamping kit, 1 weight
piece 5 N, 1 weight piece 10 N and 2 weight pieces 20 N.
The bottoms of the weight carrier and of the weights are fitted with a threaded bore hole. The weights are fitted additionally with appropriate thread bolts on the top. By that way, weights can be easily added or re-moved.
Floor type housing, of sheet steel, papyrus-white structure varnished, swivel head mainly of anodized aluminum, weights and parts of the swivelling gear browned, small parts browned or nickel plated, for connection to A.C. 230 V 50 Hz.
PTL
贸易商
全新
德国