氮吹仪采用惰性气体对加热样液进行吹扫，使待处理样品迅速浓缩，达到快速分离纯化的效果。该方法操作简便，尤其可以同时处理多个样品，大大缩短了检测时间。被广泛应用于农残检测，制药行业和通用研究中的样品批量处理。

Pressured gas blowing concentrators carry on inert gases blowing on the heating samples, concentrate the samples repidly, in order to achieve fast seperation efforts. Especially they can operate muti-samples simultaneously, shorten testing time. They are widely used in detect pesticide residues, pharmacy and muti-samples experiment in general areas.

      96孔干式氮吹仪

简易型氮吹仪：（“0”系列）

标准型氮吹仪：（“1”系列）

可调型氮吹仪：（“2”系列）

1、每个气道都可同时或独立控制，升降高度可根据试管高度自由调节。

2、选取智能温控器，数字显示，PID调节，干式加热温控范围从室温+5～150℃，水浴加热温控范围从室温+5～100℃，完全满足实验需要，且设有上限温度报警功能，使操作更加安全。

3、经过表面氧化处理的加热块或不锈钢支架（水浴）清洁美观，使用寿命更长，可根据要求定制不同孔径模块，满足使用者需求。

4、独特的压力显示使气源的流量控制更加直观，方便流量大小的调节，减少了不必要的气体损耗，节约成本。(此功能仅适用于型号为11D，12D,13D的氮吹仪)

5、新品可调型氮吹仪克服了以往氮吹仪中氮气流量不均而导致样品不能同时吹干的缺点，每路都配有流量调节装置，使流量的控制更加简便。(此功能仅适用于型号为21D，22D的氮吹仪)

6、如有特殊需求可来电定制。

1、Every air passage is capable of operating simultaneously or independently. The users can adjust freely according to the height of tube.

2、Choose intelligence temperature controller with a digital display, PID control, the range of temperature is from ambient+5℃ to 150℃(dry bath) and ambient+5℃ to 100℃(water). it is able to fulfill experiment requirement. Built-in heat-triggered protector can make the operation more securely.

3、Anodized aluminum heating blocks or stainless steel brackets are clean and beautiful, extending using life. We can offer different size holes of the block according the demand.

4、The unique design of the pressure gauge can control the flowing more directly, readuce waste and save the cost effectively.( It is only suitable for mode 11D, 12D, 13D)

5、The new adjustable Pressured gas blowing concentrators overcome the handicap causes by poor distribution of the nitrogen flow that results it can not blowing the samples at the same time.Every passage has a valve that regulates the flow of a fluid, it make the adjustment more convenient. ( It is only suitable for mode 21D, 22D)

6、Please call us if you have special need.