针对市场上很多假冒德国优图UV-DESIGN公司生产的UV能量计，UV-DESIGN生产的所有产品都有以下Logo, 谨防上当假冒产品采用国产传感器，测量数据不稳定，测量出来的数据相差幅度大，而且假冒能量计,每两­叁个月就要校准。严重影响德国优图UV-DESIGN公司的声誉.真假识别方法请查询以下网址  UV-1260 Colour SD Radiometer + Dosimeter
+ choice of a combination of two different spectral ranges:
+ UV-A intensity mW/cm2 + UV-V dose mJ/cm2
+ UV-B intensity mW/cm2 + UV-V dose mJ/cm2
+ UV-C intensity mW/cm2 + UV-A dose mJ/cm2
+ UV-V intensity mW/cm2 + UV-V dose mJ/cm2
+ temperature measuring °C/°F
+ big colour graphic display
+ numerical and graphical display
+ permanent or „triggered“ measuring mode*
+ SD Memory Card
+ graphic chart on computer
+ re-chargeable accu cells with charger
The UV-1260 Colour SD Radiometer + Dosimeter is a self-contained, high quality UV measuring instrument. It is
designed to measure and record UV intensity, UV dosage and temperature in the UV curing process. Measuring results
are indicated both, graphically and numerically on a big colour display.
It is equipped with two different UV sensors for the individual measuring of a combination of either
UV-A 315 – 410 nm
UV-B 280 – 315 nm
UV-C 230 – 280 nm
UV-V 395 – 445 nm
UV 230 – 410 nm
With these two different UV-bands many of the measuring requirements of UV curing applications can be covered.
Due to its two different UV sensors and the integrated microprocessor the UV-1260 Colour SD Radiometer + Dosimeter
can measure, record and display the peak of the UV-intensity (mW/cm2) for each UV-band individually plus the peak of
total UV energy.
Additionally, this instrument is calculating the UV-dosage (mJ/cm2) of the UV energy supplied during the time of exposure
of one measuring cycle. The UV-dosage is calculated for each UV-band (UV-A, UV-B and UV-C or UV-V) individually and
as total Integral of UV-dosage over all three UV-bands. This allows to determine not only the total energy, but also how
that energy is delivered, i.e., what intensity and dose at what UV-band.
With an extra sensor for measuring temperatures from 0 to 230° F / 0 to 110° C.
*This instrument features a selectable „triggered mode“, i.e. the 30 sec recording cycle starts within a 120 second
readiness phase not before the incident UV-intensity exceeds 2 mW/cm².
The three sensors are on the back of the unit which also serves as a heat shield. After completion of the measuring cycle
the measuring results are instantly displayed numerically and graphically auto-scaled on the built in 45 x 34 mm (1.75” x
1.3”) TFT colour display.
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension
of the battery service life.
This Radiometer + Dosimeter is equipped with an SD-Memory Card Slot and an evaluation software for downloading the
data to a computer to show, edit and store a history of the measuring results of the entire measuring cycle as graphic
charts (mW/cm2) and (mJ/cm2) and (°C/°F)
The following versions are available as a standard :
63.6.1. UV-1261 Colour SD Radiometer + Dosimeter UV-A + UV-V + Temp
63.6.2. UV-1262 Colour SD Radiometer + Dosimeter UV-A + UV-B + Temp
63.6.3. UV-1263 Colour SD Radiometer + Dosimeter UV + UV-A + Temp
63.6.4. UV-1264 Colour SD Radiometer + Dosimeter UV + UV-B + Temp
63.6.5. UV-1265 Colour SD Radiometer + Dosimeter UV + UV-V + Temp
63.6.6. UV-1266 Colour SD Radiometer + Dosimeter UV-B + UV-V + Temp
63.6.7. UV-1267 Colour SD Radiometer + Dosimeter UV-C + UV-V + TempUV-1260 Colour SD Radiometer + Dosimeter
Technical Data:以上是德国uv能量计 UV-1260 uv能量计/焦耳计的详细信息，如果您对德国uv能量计 UV-1260 uv能量计/焦耳计的价格、厂家、型号、图片有什么疑问，请联系我们获取德国uv能量计 UV-1260 uv能量计/焦耳计的新信息。