Wedge-type Compressive Tester 3/32
to test wedge compressive and tensile strength of cast
specimens according to the wedge-type compressive
principle.
Test load : 5 kN - max. 50 kN
Test cutting edge : 90 !a wedge angle
Wedge length : 40 mm
Peak wedge radius : 0,2 mm
Specimen diameter : 20 mm ?
Specimen thickness : up to 7 mm
Force measurement : through DMS force sensor
Speed : steadily adjustable
from 0,01 up to 30 mm/min.
Safety switch-off : each on the
- extremities of the crosshead and operating when
- exceeding the overload force.
Data transmission : USB

Dimensions : approx. 700 x 500 x 950 mm
Weight : approx. 200 kg netto
Colour : front panel light grey RAL 7035,
casing!fls outside dark grey RAL 7021
This device runs with measuring, controlling and
evaluating electronic unit. It has a LCD-display and a
numeric keyboard. The measuring results can be PC-
evaluated optionally.
A safety device prevents anybody from reaching the test
chamber and the specimens from splitting when testing.

Software package to perform the strength tests
comfortably and also some other testing methods on
materials on special testing devices of the company
K?gel Werkstoff- und Materialpr¤,fsysteme Gmb
main functions:
- communication between PC and testing device
- registration and storage of testing - and material data
- determination of test conditions
- registration and storage of data of the testing device

- control of the testing device
- control of the test sequence
- display of graphs (also multiple graph with poss
shifting the x-axis) with possibility to enlarge the
- determination and calculation of measured valu
including state-approved certificate
- structured display and storage of input- and me
data and results on a data carrier
- printing of test certificate
- configurable ASCII-output of test series