进口臭氧分析仪美国2BModel202
价格:电议
地区:辽宁省
电 话:0412 8816704
传 真:0412 8814768
品牌美国2B型号Model202
类型便携式臭氧检测仪测量范围0-100ppM
测量对象臭氧测量2%

进口臭氧分析仪美国2BModel202,臭氧分析仪,进口臭氧分析仪设计用来测量大气中的臭氧浓度,范围从1.5 ppbv 到250 ppmv,该仪器使用了已标准的紫外吸收技术。仪器具有高的,小巧的体积和低功耗。是许多远程现场监测和城市网络监测应用的理想工具;也是科学试验、实验研究和工艺监测的理想选择。 
 
联系邮件
   QQ  

 

 

详细介绍:
  • 测量原理:254 nm紫外吸收技术
    量程:1.5 ppbv到250 ppmv
    和准确度:优于1.5 ppbv 或2%
    测量间隙:10 秒(平均选项:10s,1 min,5 min,1 hr)
    流量率:约1L/min
    数据储存:20480行(每10s 储存一个数据平均可达到2.4 天,每5 分钟可达2.4 月)
    数据输出:RS-232,0-2.5V DC 模拟,LCD显示
    数据输入:3 通道,0-2.5 V DC
    电源:12 V DC,4.0 W (2.9 W 低功耗模式下)
    尺寸:9 cm x 21 cm x 29 cm
    重量:2.1kg

  •  

  • 主要特点

    • • 基于UV紫外吸收技术
      • 高(1.5 ppbv)

    • • 低功耗12V DC (4.0 W)

    • • 体积小巧,重量轻
      • 包含内部数据记录器和实时时钟,3个附加的模拟信号输入。
      • 在线微处理器具有交互式菜单,包括数据平均选项20s,1m,5m,1hr
      • RS-232 RS232输出时间/日期,O3浓度、温度和压力

    • • 模拟输出(0-2.5V DC)
      • 两行液晶显示

  •  

       202臭氧检测仪是为了检测空气中的臭氧浓度而设计的
    ·仪器具有高,低损耗的特点
    ·广泛应用于科学实验和工艺监测等领域

    技术参数

    检测原理254nm的紫外吸收技术
    检测范围1.5 ppb to 250 ppm;
    0.1ppb
    误差1.5ppb或者读数的2%
    临界值3.0 ppb
    可追踪校准
    测量时间间隔10秒(平均数据选项:10秒,1分钟,5分钟,1小时)
    气体流量1升/分钟
    流量需求> 0.6升/分钟
    零点漂移3PPB/天
    <5 ppb/年
    灵敏度漂移<1%/天
    <3%/年
    测量时间,频率10秒,0.1赫兹
    响应时间20秒
    采样平均时间10秒,1分钟,5分钟,1小时
    数据存储14,336 lines (10 s avg. = 1.4 days; 5 min avg = 1.4 mo.)
    臭氧单位ppb的,ppm时,pphm,微克米-3米-3毫克
    重量2.1公斤

    标准配置
    ·臭氧监测模型202
    ·交流电源适配器(100-240 VAC至12伏直流电)
    ·电池导线连接器
    ·操作手册光盘
    ·校准数据和可追校准证书
    ·仪器出生证明书
    ·一年保修

     

     

     

      The 2B Technologies Model 202 Ozone Monitor™ is designed to enable accurate and precise measurements of ozone ranging from low ppb (precision of ~1 ppb) up to 100,000 ppb (0-100 ppm) based on the well established technique of absorption of UV light at 254 nm.  The Model 202 Ozone Monitor™ is light weight (4.7 lb., 2.1 kg.) and has a low power consumption (12V DC, 0.33 amp, 4.0 Watt) relative to conventional instruments and is therefore well suited for applications such as:
    • Vertical profiling using balloons, kites, RPVs and light aircraft where space and weight are highly limited
    • Long-term monitoring at remote locations where power is highly limited
    • Urban arrays of ground-based detectors
    • Personal exposure monitoring for studies of health effects of air pollutants
    • Environmental health and safety monitoring
    • Laboratory studies of the effects of ozone exposure on materials and organisms

    The Model 202 has been designated by the EPA as a Federal Equivalent MethodOptions

    • Flash Card Memory for virtually unlimited, portable data storage
    • GPS for continuous logging of latitude, longitude and altitude
    • Rechargeable metal hydride battery provides 12 hr of continuous operation
    • External particle filter
    • Serial-to-USB adapter
    • Rotary vane air pump for low temperature and quiet operation
    • External air pump for long pump life

    System Includes

    • Model 202 Ozone Monitor
    • AC Power Adapter (100-240 VAC to 12 VDC) with Country-Specific Plug
    • Cigarette Lighter Adapter 
    • Battery Wire Connector
    • Zeroing Cartridge
    • Operation Manual on CD
    • Calibration Data and NIST-Traceable Calibration Certificate
    • Instrument Birth Certificate
    • One Year Warranty

    Specifications

    Measurement PrincipleUV Absorption at 254 nm
    Linear Dynamic Range1.5 ppb to 250 ppm
    Resolution0.1 ppb
    Precision (1σ; rms noise)Greater of 1.5 ppb or 2% of reading
    AccuracyGreater of 1.5 ppb or 2% of reading
    Limit of Detection (2σ)3.0 ppb
    NIST-Traceable CalibrationYes
    Measurement Interval10 s (Data averaging options: 10 s, 1 min, 5 min, 1 hr)
    Flow Rate (nominal)~1 Liter/min
    Flow Rate Requirement>0.6 L/min
    Baseline Drift

    <2 ppb/day
    <5 ppb/year

    Sensitivity Drift

    <1%/day
    <3%/year

    Measurement Time, Frequency10 s, 0.1 Hz
    Response Time, 100% of Step Change20 s, 2 points
    Averaging Times10 s, 1 min, 5 min, 1 hr
    Data Storage14,336 lines (10 s avg. = 1.4 days; 5 min avg = 1.4 mo.)
    Ozone Unitsppb, ppm, pphm, µg m-3, mg m-3
    Pressure Unitsmbar, torr
    Temperature Units°C, K
    T and P CorrectedYes
    Operating Temperature Range0 to 50 °C; -20 to 50 °C with low temperature modifications (rotary vane pump and lamp heater)
    Operating Altitude Range~0-30 km (~30-1000 mbar)
    Power Requirement;
    Supplied by battery or 110/220 VAC Power Pack
    12 V dc or 120/240 V ac, 335 mA, 4.0 watt (2.9 watt with cell heater unplugged)
    Size3.5 x 8.5 x 11 inches (9 x 21 x 29 cm)
    Weight4.7 lb (2.1 kg); 1.6 lb (0.7 kg) without instrument case
    Data Logger Capacity14,336 lines (10 s avg. = 1.4 days; 1 min avg = 10 days; 5 min avg = 1.4 mo;
    1 hr avg = 1.6 yr
    Analog Inputs for Internal Logging of Other Instruments3 Analog Inputs, 0-2.5 V; For example could log external T, P and RH
    Data OutputsRS232, 0-2.5 V Analog, LCD Display; External USB Converter: (Optional 4-20 mA Current; request quote)
    Data Transfer Baud Rates1200, 2400, 4800, 19200
    Output RangesUser Defined Scaling Factor in Menu
    DewLine™Yes
    Backup Air PumpYes
    Flow MeterYes
    OptionsGPS, Flash Card Memory, 4-20 mA Current Output; Lamp Heater; Rotary Vane Air Pump; Long-Life External Air Pump; Rack Mount Case
    Upgradable to Model 205 Dual BeamYes