JX801Series Digital Pressure Gauge

应用Application

是实验仪器，供气、供水设备，工业过程压力显示和控制等的理想选择。

Ideally suited for Experiment Instrument，Air and Water Supply Equipment and Display and Control of Pressure in the Process, etc.

产品特点Features:

l          大LED显示屏；

Large LEDdisplay;

l           静态：±0.1～1%FS；

Staticaccuracy: ±0.1~1%FS;

l           12～30VDC供电；

With12 to 30VDC power source;

l           报警上限和下限任意设定；

Upper and lower limits of the alarm can be set freely;

l           一组继电器（或两组二极管报警信号报警）开关（10A）信号输出；

The signal is output with two sets ofdiodealarmor one set of relay switch;

l           四种压力单位自由切换；

Four kinds of units canbeswitchedfreely;

l           适用于无腐蚀性气体或低粘度液体介质的测量；

Applied to non-corrosive Gas or low viscosity Liquid 

  产品简介Introduce:

JX801系列数显压力表采用MEMS和专用集成电路（ASIC）技术制造而成，高，价格低。它的部件为微机械技术硅压力传感器或陶瓷压力传感器，没有任何移动部件，因此使用寿命长。

该产品使用十分便利。大型LED数字显示屏避免了从模拟刻度表上对数据估读的误差。通过面板按钮即可方便完成单位切换和电源开关。

经济的价格，高的度和便于阅读的数码管显示，使该产品成为机械压力开关和机械压力表的理想替代品。此外，本公司可根据您特殊的需求来定制压力表或提供OEM服务。

JX801, with high accuracy and low price, incorporates MEMS technology and custom Application Specific Integrated Circuit (ASIC) technology in the design. The kernel part is micro-machine silicon pressure sensor orCeramic Pressure Sensor. Without the moving parts, it has a long life.

It is very convenient to use. The LCD display avoid the error reading from simulate dial. You can use the button in the panel to switch the unit and turn the gauge on and off.

With economic price, high accuracy and convenient to read the display of the LCD, this product is an ideal substitute ofMechanical pressure switch andtheMechanical Pressure Gauge. Moreover, we can produce the digital gauge according to your special requirements, and we can also supply OEM service.

产品规格Specification: