齿轮周节检查仪m2-16齿轮周节仪
价格：电议
地区：浙江省
电 话：86 0576 86448543
手 机：13666444881
传 真：86 0576 86448542
-
图文详情
-
产品属性
-
相关推荐
| 品牌 | 上量 | 型号 | M2-16 |
| 测量范围 | 0.001mm | 测量 | 0.001mm |
| 产品适用范围 | 0.001mm |
| 仪器工作原理 aa仪器工作时齿顶圆顶上取三点作 为定位基准，以被测齿轮任意一个周 节调整仪器对零，来比较其它各齿周 节与对周节的大小，后进行数 据处理，即可得到您所需测量周节的 结果。 | |
| Operating principle Three points should be selected as base at the cylindrical top while the tester is working, setting any pitch tester of measuring gear to zero, to compare the size of other pitch with the first pitch. The satisfied measuring results are obtained after data processing finished. | |
| 适用于检查7 级或低于7 级的内外齿合直齿与斜齿圆柱齿轮的周节偏差。操作简便，易于维修，可供各工厂计量室及车间使用。 | This tester is suitable to measure accuracies of pitch deviation with inside and outside straight helical circular gear among seventh degree. Easy to operate and maintenance. |
| 主要技术参数 Main technical parameter | |
| 被测齿轮模数Measuring gear module | 1-16mm |
| 仪器指示表的分度值Tester indicating | 0.001mm |
| 仪器示值误差 Error indicating 在千分表任意0.1mm 范围内允差 Within any 0.1mm microgauge range 在千分表全行程范围内允差 Within ful distance range | ±0.003mm ±0.01mm |