Dynisco丹尼斯科PT462E-35MPA-6/18
价格:1.00
地区:上海市
电 话:021-37635502
手 机:13661817191

TEMPERATURE & MECHANICAL CHARAERISTICS Max Diaphragm Temperature: 750oF (400oC) Zero Shift (due to temperature change): 25 psi/100oF Tical (45 psi/100oC) Eleronics Operating Temperature: 250oF (121oC) Zero Shift Due to Temperature Change: +/- 0.05% FS/oF max (+/- 0.10% FS/oC max) Sensitivity Shift Due to Temperature Change: +/- 0.02% FS/oF max (+/- 0.04% FS/oC max) Mounting Torque: 500 inch/lbs. maximum Standard Wetted Parts: Dymax? coated 15-5 PH SST PERFORMANCE CHARAERISTICS Output: 3.33 mV/V +/- 2.0% Input Voltage: 10 Vdc recommended, 12 Vdc maximum Combined Error: +/- 0.5% FSO, (Including Linearity, Repeatability & Hysteris) Repeatability: +/- 0.2%FSO Configuration: Four-arm bonded foil Wheatstone bridge strain gage Bridge Ristance: Input: 345 Ohms minimum Output: 350 Ohms +/- 10% Over Prsure: 2 X FSO or 35,000 psi whichever is ls Zero Balance: +/- 10% FSO Internal Shunt Calibration (R-Cal): 80% FSO +/- 1% Insulation Ristance: 1000 megohms @ 50 Vdc ? Reliable, repeatable prsure measurements ? Superior abrasion ristance ? Good stability and repeatability ? Wide variety of prsure rang ? Easy to calibrate with local indicator ? Accuracy better than +/- 0.5% ? Dymax? coated stainls steel wetted parts ? Proven sensor dign ? 0 - 500 to 0 -30,000 psi ? Internal 80% shunt calibration The PT460E Seri transducer is a +/- 0.5% sensor ideal for melt prsure applications requiring simple installation, repeatability and reliability. The PT460E transducers provide the industry standard 3.33 mV/V signal digned to work with most prsure indicators. The PT460E com equipped with a six pin bendix conneor. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT460E featur a 1/2-20 UNF thread for installation in standard transducer mounting hol and can be supplied with a variety of other elerical conneions if dired.