TE-81M12 多用途光纤熔接机(可熔接芯数达12芯)

住友光纤熔接机81M12,住友熔接机贸易商住友光纤熔接机住友

• 12芯光纤的熔接时间需14秒

• 双联自动加热器作业效率

• 全屏导航触摸界面实现简单操作住友光纤熔接机81M12,住友熔接机贸易商住友光纤熔接机住友

---

、便捷、

• 12芯光纤的熔接时间约14秒，并且自动双联加热器实现加热补强时间约45秒(使用FPS-6热缩管的情况下)，其加热器是业界的功能，在中国拥有。

• 人性化的全屏导航触摸界面和直观的图形用户界面

• 熔接机内置帮助视频，可在主机显示屏上播放

• 进一步了振、水、尘以及风等特性

• 可通过互联网进行软件升级和远程诊断住友光纤熔接机81M12,住友熔接机贸易商住友光纤熔接机住友

---

规格参数

TE-81M12 住友光纤熔接机81M12,住友熔接机贸易商住友光纤熔接机住友

Applicable optical fiber	Material	Silica Gl
	Profile te	Single Mode Fiber (SMF)/ITU-T G652 Multi Mode Fiber (MMF)/ITU-T G651 Dispersion Shifted Fiber (DSF)/ITU-T G653 Non-Zero Dispersion Shifted Fiber (NZ-DSF)/ITU-T G655, G656 Bend Insensitive Fiber (BIF)/ITU-T G657
	Number of fiber *1	1c, 2c, 4c, 5c, 6c, 8c, 10c, 12c
	Cladding diameter	φ125 μm
	Coating diameter *2	Single: 250 μm, 500 μm, 900 μm Ribbon fiber thickness: 280-400 μm
	Cleave length	10mm
Applicable cable	0.25mm primary coated 1-fiber drop cable	3.1mm or 2.6mm×2.0mm (Excluding messenger steel wire)
	0.25mm primary coated 1-fiber indoor cable	2.0mm×1.6mm
Physical Characteristics	Size (Main body)	120W×154D×130H(mm) *3 (4.7W×6.0D×5.1H(inches))
	Weight	Approx. 2.0 kg (With Battery pack BU-11)
	Display size	4.1" touch screen color LCD display
Power Conditions	Power consumption	Max. 80W
	AC operation	With AC adapter ADC-1430S Input: AC 100-240V 50/60Hz 1.1A
	DC operation	Input: DC 10-15V, 4.5A
	Battery operation	(With BU-11) 11.1V (4600mAh)
	DC output	12V For Sumitomo’s hot jacket remover
In - Out Terminal	Serial port	U 2.0 mini-B te
	Storage media	SD / SDHC memory card
Splice Performance at room temperature (25°C)	Splice loss (tical)*4	SMF : 0.05 dB MMF: 0.02 dB DSF : 0.08 dB NZDSF : 0.08 dB
	Screening load (tical)	1.96N - 2.09N (at stage)
	Splice time (tical)	Approx. 14 seconds (SMF8-12c) Approx. 12 seconds (SMF4c) Approx. 9 seconds (SMF1c)
	Splice & Heat cycles	Approx. 160 cycles *5
	Splice program	Maximum 200 fusion programs can be selected and customized.
	Splice data storage	10,000 splices
	Splice image capture	64 splices
Heater Performance	The number of heaters	2 built-in heaters are available
	Sleeve length	Up to 60mm
	Protection sleeve	Fiber protection sleeve
	Up to 60mm sleeve	60mm for single fiber (FPS-1, FPS-61-2.6) 40mm for ribbon up to 8c fiber (FPS-5) 40mm for ribbon up to 12c fiber (FPS-6, FPS-M12) Protection sleeve for Splice-on Connector(Single Fiber connector only)
	Heating time(tical)*6	Approx. 45 seconds. (40mm for 12c fiber)
	Heating Program	Max. 100 settings
Environmental Conditions and Power Conditions	Operating temperature	-10 to +50°C
	Storage temperature	-40 to +80°C
	Humidity	0 to 95%RH with no dew present
	Altitude	Up to 3,660 m
Environmental Durability	Shock resistance*7	Drop from 76cm on 5 faces (Excluding face)
	Water resistance*7	Equivalent to IPx2 (Operates normally after being exposed to water ping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree.)
	Dust resistance*7	Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 um or below)

住友光纤熔接机81M12,住友熔接机贸易商住友光纤熔接机住友

*1 光纤夹具需要合涂覆层光纤和光纤芯数的要求。

*2 光纤夹具不能用于松套管光缆。
*3 突出的部分不包括在内。住友光纤熔接机81M12,住友熔接机贸易商住友光纤熔接机住友*4 在室温条件下，用住友同种光纤以ITU-T和IEC标准的切断法测得。
*5 循环次数根据电池状态和操作环境不同也会随之变化。
*6 使用住友生产的保护套管在室温条件下，供电为AC电源适配器。
*7 住友对电池性能进行了试验和确认，但不本产品受损情况下的状态。

通讯主要产品：光纤熔接机，光时域反射仪，2M误码测试仪，光缆普查仪，光功，光源，插回损测试仪，光纤寻障仪等，代理品牌有：住友光纤熔接机81M12,住友熔接机贸易商住友光纤熔接机住友，藤仓，古河，康未，一诺，相和，瑞研，信测，诺克，安立，EXFO，JDSU,罗意斯，横河；