用于双光子显微镜的电光调制器系统

所属类别： ? 调制器 ? 电光调制器/电光Q开关
所属品牌：美国ConOptics公司

产品简介

用于双光子显微镜系统，控制钛蓝宝石激光器光强的电光调制器

关键词：双光子显微镜电光调制器 Conoptics，双光子显微镜功率调节系统

Conoptics是光学和激光附件制造业的先驱，开发了一套用于多光子显微镜的电光调制器。

多光子荧光显微镜结合了先进的激光扫描显微镜技术，使用红外波长获取更高分辨率的三维图像，多光子荧光显微镜是非常实用的研究工具。

Conoptics调制器采用KD*P晶体，光束从中心入射，中心出射，标准的波长范围从700nm到1100nm。电源使用Model 302RM，拥有1us的上升和下降沿的时间，可作为一个250KHz高速开关，并且可作为一个强度调制器。

调制器参数：

Aperture	3.5mm
Dimensions	50mm Diameter * 135mm
Transmission	>90%
Standard Wavelength Ranges	700-1100nm
Piezo Resonances	Minimal with clamped version(BK option)
Driver Compatibility	Full modulation with M302 Power Amplifier up to 1064nm

放大器参数：

Cabinet	Driver and power supply in single cabinet
Test Feature	Built-in test feature allows testing for max transmission of Pockel Cell with out adjusting bias voltage
DC Bias	Improved DC biasing of Pockel Cell provides greater linearity at higher bias voltages
Voltage Range	+/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator
Linearity	10bits referenced to full scale (.1%)
Bandwidth	DC to >200Khz with 90pf load and 3M (RG-62) cables
Max. Output Drive Level	750VP-P into 90pf load
Amplifier Input Signal	2VP-P max into 50/1K ohms delivers 750VP-P out
Input Signal Format	Options include Unipolar positive, negative or bipolar
Input Power (AC)	60W typical. Input power is both load (modulator) and frequency dependent.
Dimensions	19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm)
Cooling	Forced air
Operating Environment	Designed for laboratory use (indoor only) Temperature range +5deg C to +50deg C ambient Humidity 20%-80% RH up to 32deg C Altitude <3000M
Weight	20lbs (9.07kg)

分享到 : 人人网腾讯微博新浪微博搜狐微博网易微博
相关产品 ConOptics低压电光调制器法拉第隔离器