英国Vector W200P风向传感器W200P/L
价格:电议
地区:北京市
电 话:010-57105031
手 机:15300399766
传 真:010-82986829
图文详情
产品属性
相关推荐
英国Vector风向风速传感器是世界(First Class)测风传感器。【W200P风向传感器】具有较高的灵敏度,精密球形轴承具有防腐蚀、防尘、防潮,使传感器可长期在野外各种天气条件下工作,尤其适合于偏远工作站。该传感器在气象、风资源评估、环境监测等领域有广泛的应用。
风向传感器 | W200P |
启动风速 | 0.6m/s(当风向标与风向的角度大于45度时动作) |
风速 | >75m/s |
测量范围 | 机械角度360度,允许全方位连续转动 |
在稳定的5m/s风速时为±2度 | |
分辨率 | ±0.2度 |
重复性 | ±0.5度 |
线性 | 满刻度输出的0.5% |
温度范围 | -50℃~+70℃ |
连续电角度 | 357.7°±1.5°(正北方2.3°缺口) |
变化电角度 | 356.5°±1.5°(3.5°盲区) |
电位器消耗电流 | 20mA |
典型寿命 | 5×107转(10年) |
绝缘电阻 | 小50MΩ |
电位计阻抗 | 1kΩ±10% |
电位器电压 | 125V |
电能消耗 | -50~20℃时0.5W,70℃时线性减到0.25W |
温度系数 | ±50ppm/℃ |
供电电压 | 20V |
Windvanes | W200P |
Threshold: | 0.6m/s (standard), 0.75m/s (/WR), 0.5m/s (/LV) |
Distance Constant: | 2.3m (standard), 2.4m (/LV) |
Damping Ratio: | 0.2m (standard), 0.24m (/LV) |
Recovery Distance: | 0.51m (standard), 0.54m (/LV) |
Damped Natural Wavelength: | 3.4m (standard), 3.6m (/LV) |
Repeatability: | +/- 0.5 ° if vane removed and replaced (note: no measurable backlash movement during use) |
Life of Potentiometer: | 5x107 cycles (10 years typical exposure) |
Service Interval: | 4 to 5 years |
Accuracy: | +/-3° in steady winds over 5m/s (6m/s /WR, 3.5m/s /LV), with +/-2° obtainable following calibration. |
Maximum Wind Speed: | over 75 m/s (standard), over 60m/s (/LV) |
Range: | 360° mechanical angle, continuous rotation allowed |
Temperature Range: | -50 to +70 °C |
Potentiometer Resistance: | 1000 Ohms (+/- 10%) |
Wiper Current: | 50uA recommended (20mA absolute maximum) |
Potentiometer Voltage: | 1V to 5V (recommended), 20V absolute maximum. |
Potentiometer Continuity Angle: | 357.7 +/- 1.5° (2.3° gap at north) |
Potentiometer Variation Angle: | 356.5 +/-1.5° (3.5° dead-band) |
Potentiometer Resolution: | +/-0.2° |
Potentiometer Independent Non-Linearity: | +/-0.25° (unloaded) |
Connections: | 6 wire screened cable. Screen insulated at instrument end, black connects to body. Red & White connect to 360° end and Blue & Yellow connect to 0° end of pot. Green connects to wiper. |
Fin (Vane-Arm): | type F20 as standard. |
Dimensions: | This instrument is constructed using our standard fin and windvane body design anddimensions. |
Wiring/Connections (Cable colours): | For wiring details click HERE |
Cable: | 3m (9ft10in) permanently attached 6-conductor* cable with braided shield/screen as standard. Longer lengths are available to order (up to 115m). Spec: Def Stan 61-12 part 4, 0.22mm2(~24AWG). *Note: 8-conductor used for /HE4 models. |
Calibration Certificate(optional extra): | The W200P windvane is available with anIEC/MEASNET Calibration Certificate(for an additional charge) |
风向传感器 | W200P/L |
启动风速 | 0.5m/s(标准)0.6m/s(WR型)0.35m/s(LV型) |
风速 | >75m/s(标准)>60m/s(LV型) |
测量范围 | 机械角度360度,允许全方位连续转动 |
±4度风速稳定在3m/s时(3.5m/s/WR型,2m/s/LV型) | |
分辨率 | ±0.2度 |
重复性 | ±0.5度 |
线性 | 满刻度输出的0.5% |
温度范围 | -30℃~+70℃ |
连续电角度 | 357°±2°(正北方3°缺口) |
变化电角度 | 355°±3°(5°盲区) |
电位器消耗电流 | 20mA |
典型寿命 | 5×107转(10年) |
绝缘电阻 | 小50MΩ |
电位计阻抗 | 1kΩ±10% |
供电电压 | 20V |
W200P/l | |
Threshold: | 0.5m/s (standard), 0.6m/s (/WR), 0.35m/s (/LV) |
Distance Constant: | 2.3m (standard), 2.4m (/LV) |
Damping Ratio: | 0.2m (standard), 0.24m (/LV) |
Recovery Distance: | 0.51m (standard), 0.54m (/LV) |
Damped Natural Wavelength: | 3.4m (standard), 3.6m (/LV) |
Repeatability: | +/- 0.5 ° if vane removed and replaced (note: no measurable backlash movement during use) |
Life of Potentiometer: | 2x107 cycles (4 years typical exposure) |
Service Interval: | 2 to 3 years |
Accuracy: | +/-4° in steady winds over 3m/s (3.5m/s /WR, 2m/s /LV). |
Maximum Wind Speed: | over 75 m/s (standard), over 60m/s (/LV) |
Range: | 360° mechanical angle, continuous rotation allowed |
Temperature Range: | -30 to +70 °C |
Potentiometer Resistance: | 2000 Ohms (+/- 3%) |
Wiper Current: | 50uA recommended (10mA absolute maximum) |
Potentiometer Voltage: | 1V to 5V (recommended), 20V absolute maximum. |
PotentiometerContinuity Angle: | 357 +/- 2° (typically 3° gap at north) |
Potentiometer Variation Angle: | 355 +/-3° (typically 5° dead-band) |
Potentiometer Resolution: | +/-0.25° |
Potentiometer Independent Non-Linearity:: | +/-0.5% (unloaded) |
Connections: | 6 wire screened cable. Screen insulated at instrument end, black connects to body. Red & White connect to 360° end and Blue & Yellow connect to 0° end of pot. Green connects to wiper. |
Fin (Vane-Arm): | type F20 as standard. |
Dimensions: | This instrument is constructed using our standard fin and windvane body design and dimensions. |
Wiring/Connections (Cable colours): | For wiring details click HERE |
Cable: | 3m (9ft10in) permanently attached 6-conductor* cable with braided shield/screen as standard. Longer lengths are available to order (up to 115m). Spec: Def Stan 61-12 part 4, 0.22mm2(~24AWG). *Note: 8-conductor used for /HE4 models. |
英国Vector
贸易商
英国