宝马（BMW)编程器供电稳压电源

（数显双表头+可调节+高稳定）

【sss power中文概述】
宝马在编程的过程中出现编锁车和编死车，大部分都是应为电压不稳定造成的，宝马在编程的过程中要求的电压波动值是非常的小的，本设备能提供非常稳定的电压，以满足编程的需要。本产品为国外定制，国内代工的，质量非常好。强烈建议编程的客户购买本设备。
该电源是专门的宝马 OPS 编程。
通常为的宝马方案编制和维护期间车辆编程的永恒电压和电流
.编程加电过程中必须保持水平在狭窄的范围内破坏控制器的机会减至。它必须调整的电压之间至 13.5 伏 12.8 之前将电源线连接到汽车的电池。那里是液晶显示器，以显示统计信息。
它不是需要运行，供和稳定电压的一辆车。
它可以调整交流和直流。它是非常强大和稳定。
还可以适用于沃尔沃、 保时捷、 大众、 奥迪、 通用！
----------------------------------------------------------------------------------------------------------------------
【sss power英文概述】
THIS POWER SUPPLY IS SPECIALLY FOR BMW OPS PROGRAMMING.
USUALLY FOR PROFESSIONAL PROGRAMMING FOR NEW BMW AND MAINTAINING COSTANT VOLTAGE AND CURRENT DURING VEHICLE ASSEMBLEY TO PROGRAMMING
.
During programming power levels must be maintained in a narrow range to minimize the chance of damaging controllers. It must be adjusted voltage between 12.8 till 13.5 Volt before connect power cable to car battery. There is a LCD Monitor to show the statistics .
It is no need to run a car to supply for permanent and stable voltage.
It can adjust the AC and DC .It is very strong and stablization.
Recommended by almost all manufacturers from BMW and Mercedes Benz to Volvo, Porsche, Volkswagen, Audi, Mann and many others.
Not a Battery Chargers .
-------------------------------------------------------------------------------------------------------------------------
【产品参数】