产品说明
Product description

氧分析仪 抗毒性气体燃料池氧传感器 多功能氧气分析仪
Oxygen analyzer poison gas fuel cell oxygen sensor multi functional oxygen analyzer

型号:G80056
Model: G80056

一、概述G80056氧分析仪采用德国产完全密封的抗毒性气体燃料池氧传感器，彻底解决了极谱隔膜式、顺磁式、磁压力式等氧分析仪易受毒性气体（如SO2、H2S、CO2等）腐蚀和受气体温湿度、流量等因素影响，使传感器寿命缩短和测量降低，而且调校烦杂的缺点，能够在工业流程中长期使用。
One, overview ofG80056oxygen analyzer adopts German resistance gas fuel cell oxygen sensor completely sealed, completely solve the polarogram diaphragm type, paramagnetic, magnetic pressure oxygen analyzer is susceptible to the toxic gas (such as SO2, H2S, CO2 and so on) the factors influencing corrosion and air temperature and humidity, flow, the service life of the sensor to shorten and reduce the measurement accuracy, and adjust all the shortcomings, can be long-term use in industrial processes.

二、 应用领域 Application Range
Two, application field of Application Range

化肥、化工、冶金、空分、热电、高压氧舱、医疗、工业锅炉、窑炉、加热炉、转炉煤气回收、电子元件、磁性材料、水泥、动力测试、环境保护、蔬菜保鲜等行业的氧气测量。
Oxygen measuring fertilizer, chemical, metallurgical, power, air separation, hyperbaric oxygen, medical, industrial boiler, furnace, heating furnace, converter gas recovery, electronic components, magnetic materials, cement, dynamic testing, environmental protection, fresh vegetables and other industries.

三、检测原理 Detection Principle
Three, the detection principle of Detection Principle

传感器是由浸没在酸性胶体电解液中的高活性的氧电极和金属电极构成。样气中的氧分子通过高分子薄膜扩散到氧电极中进行电化学反应，产生的电流与扩散到氧电极的氧分子数成正比。
The sensor is composed of an immersion in acidic colloid electrolyte of high activity for the oxygen electrode and the metal electrode. Oxygen molecules in the sample gas diffusion through the polymer film to oxygen electrode in electrochemical reaction, the current and diffusion of molecular oxygen into the oxygen electrode is proportional to the number of.

四、产品特点 Product Features
Four, product features Product Features

●对干扰性气体如CO2、CO、H2S、NOx、N2、Ar、H2、CH4、、CL2、CFC’S、SO2、NH3、HCI、H2O等无影响或有轻微影响；
● the interfering gases such as CO2, CO, H2S, NOx, N2, Ar, H2, CH4, CFC, CL2, S, SO2 ', NH3, HCI, H2O had no effect or slight influence;

●传感器寿命长，正常使用条件下可达 四年，实验室模拟工矿环境测试寿命达十年以上；
● sensor  and long service life, under normal conditions of use of up to four years, the laboratory simulation of mining environmental testing life of ten years;

● 免维护（传感器完全密封）；
● maintenance free (sensor completely sealed);

● 气压、流量无影响；
No effect of the pressure, flow;

● 温湿度自动补偿；
● automatic temperature and humidity compensation;

● 标气或空气自动标定；
The standard gas or air automatic calibration;

● 采用独特的气体过滤装置，虑除杂质、煤焦油等；
● adopt gas filtering device are unique, removing impurities, such as coal tar;

● 耗气量小（0.2-0.5L/min）；
● small consumption (0.2-0.5L/min);

● 响应速度快，<5S；
The fast response speed, <5S;

● 高，分辨率可达量程的0.01%;
● high precision, resolution of up to 0.01% of range;

● 独特的快速吹扫进样流程；
● unique quick blowing injection process;

● 特殊的防振结构,抗振性能强；
● special anti vibration structure, strong resistance to vibration performance;

● 进口专用微处理器，整机采用德国技术生产；
● imported special microprocessor, the machine adopts German technology production;

●具有RS485接口，可与DCS连接。
● with RS485 interface, can be connected to the DCS.

五、主要技术指标 Main Technology Parameters
Five, the main technical indexes of Main Technology Parameters

　　测量范围0-10ppm,100ppm,1000ppm,0-100%
The measurement range of 0-10ppm, 100ppm, 1000ppm, 0-100%

　　小分度值0.01
Minimum scale value 0.01

　 重复性Cv≤1%
Repetitive Cv ≤ 1%

零点漂移≤±1%FS/6M
Zero drift ≤± 1%FS/6M

量程漂移≤±1%FS/6M
Span drift ≤± 1%FS/6M

响应时间T90 < 5S
The response time of T90 < 5S

样气流量0.15-1.50L/min
The sample gas flow 0.15-1.50L/min

预热时间15min
Preheating time 15min

信号输出4-20mA，RS232/485
Signal output 4-20mA, RS232/485

报警输出上下限（继电器）
Upper and lower limit alarm output (relay)

工作温湿度0-45℃，20-80%RH
Working temperature of 0-45 ℃, 20-80%RH

工作电源220V±10%，50Hz±1Hz，
Power supply 220V + 10%, 50Hz + 1Hz,

BHF-SR-2030A智能，数显，19'机箱
BHF-SR-2030A intelligent, digital display, 19'case

产品为冠 源于精测