8263H206LT，世格先导两位三通电磁阀
流体温度-10°C+90°C（NBR）IP 65 IP 67 IP 67
0°C+130°C（FPM）（EN60529）与（EN60529）与（EN60529）与
粘度为5°E（?37 cStokes?平方毫米/秒）
插头连接器插头连接器插头连接器
电压直流陈竺：12-24V（+10％-5％）
膜片阀，先导式，具有完全的孔口。根据标准/ UL和CSA UL和CSA
适用于切断液体和气体流体（验证兼容性PA PET PET
的流体与物料接触）。玻璃纤维玻璃纤维玻璃钢
II 1 G Ex ia IIC T6 under FM10ATEX0015X
Ex ia IIC T6 under IECExFMG10.0008X
Meets applicable CE directives.
Refer to Engineering Section for details.
Important: These solenoids are intended for use on clean,
dry air or inert gas filtered to 40 micrometers or better. To
prevent freezing, the dew point of the media should be at
least 18°F (-8°C) below the minimum temperature to
which any portion of the clean air or gas system could be
exposed. Instrument air in compliance with ANSI/ISA
..技术特点绝缘等级F（155°C）F（155°C）H（180°C）
允许压力（PS）20bar的环境温度-10°C到+60°C-10°C到+60°C-10°C+75°C
从?300ms的开馆时间为1500毫秒?连续工作ED100％
从?1000毫秒关门时间到?2000毫秒电气连接DIN46340 - 3极插头连接器
..在与流体接触交流ZB材料：24V/50-60Hz - 115V/50Hz - 230V/50-60Hz
主体黄铜（+10％-15％）
密封橡胶或氟橡胶（其它电压和频率要求）。
and is, therefore, an acceptable medium for these valves.
Rloop - Resistance of the lead wires
Rbarrier - Internal resistance of the barrier
This current must always be greater than or equal to 0.030 amps
for proper operation of the solenoid valve.