-
图文详情
-
产品属性
-
相关推荐
产 品 规 格 书
PRODUCT SPECIFICATION
【1】适用范围 SCOPE
本规格书适用于:0.5间距柔性扁平电缆
This specification covers the 0.5mm Pitch FPC/FFC Connectors(series Locking)
【2】产品名称及型号 PRODUCT NAME AND PART NUMBER
产品名称Product Name | 产品型号Part Number |
FFC/FPC扁平电缆 |
|
|
|
【3】定格 RATINGS
项目 Item | 规 格 Requirement | ||
容许电压 Rated Voltage(MAX) | 50V | [AC/DC(有效值 Virtual value)50Hz] | |
容许电流 Rated Current(MAX) | 0.4A | ||
使用温度范围 Ambienttemperature Range | -25℃~ +85℃ | ||
【4】性能 PERFORMANCE
4.1电气性能 Electrical Performance
项目Item | 条 件 Test Condition | 规格Requirement | |
4.1.1 | 接触电阻 Contact Resistance | 适合FPC/FFC嵌合;开放电压20mV以下;短路电流10mA的状态下测定。 Mate applicable FPC/FFC and measure by dry circuit,20mV MAX,10mA. | ≤20 mΩMAX |
4.1.2 |
绝缘电阻 Insulation Resistance | 适合FPC/FFC嵌合;相邻端子间或端子与地面间加DC 500V下测定。 Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MΩMIN |
4.1.3 |
耐电压 Dielectric | 适合FPC/FFC嵌合;相邻端子间或端子与地面间加AC 200V(有效值)历时1分钟下测定。 Mate applicable FPC/FFC and apply 200V AC(virtual value)for 1minute between adjacent terminal or ground. | 无击穿现象 No Breakdown |
4.2机械性能 Mechanical Performance
项目Item | 条 件 Test Condition | 规格Requirement | |
4.2.1 | 锁紧力及拔出力 Locking and Withdrawal Force | 适合0.3mm厚的FFC;用每分钟25±3mm的速度;平行地插入、锁紧、拔出。 Insert and extract applicable FFC at the speed rate of 25±3mm/minute. | 锁紧力Locking 1.96*n (N) MAX 拔出力Withdrawal 0.49*n (N) MIN |
4.2.2 | 端子保持力 Terminal /Housing Retention Force | 以用每分钟25±3mm的速度平行向外拉 Pull the terminal at the speed rate of 25±3mm per minute | 3.92N MIN |
4.3环境和其他性能 Environmental Performance and Others
项目Item | 条 件 Test Condition | 规格Requirement | ||
4.3.1 | 重复插拔 Repeated Insertion and Withdrawal | 无通电状态;以10次/分钟的速度插拔20次 Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | 接触抵抗 Contact Resistance | 60 mΩMAX |
4.3.2 | 温度上升 Temperature Rise | 适合FPC/FFC嵌合;容许电流通电,温度测定。(UL 498) Carrying rated current load.(UL 498) | 温度上升 Temperature Rise | 30℃MAX |