霍尔转速传感器转速传感器转速测定仪转速位移检测仪

Hall speed sensor tester rotational speed sensor of displacement detector

型号:G81495

Model: G81495

G81495霍尔转速传感器,是一种采用霍尔原理的的转速传感器。它的感应对象为磁钢。当被测体上嵌入磁钢，随着被测物体转动时，传感器输出与旋转频率相关的脉冲信号，达到测速或位移检测的发讯目的。由于安装使用方便，通用性好，已被广泛应用于各种领域。

G81495 hall speed sensor, is a kind of adopting the principle of hall speed sensor. It is the induction of object for magnetic steel. When measured on embedded magnets, as the rotating object to be tested, related to the rotation frequency of the pulse signal of sensor signal, achieve the aim of transmission velocity or displacement detection. Due to the installation convenient use, good commonality, has been widely applied in various fields.

技术参数：

Technical parameters:

1.发讯频率：0~10kHz

1. The transmission frequency: 0 ~ 10 KHZ

2.供电电源：12~25V（DC）

2. Power supply: 12 ~ 25 v (DC)

3.负载电阻：≥1.0kΩ

3. Load resistance: Ω acuity 1.0 k

4.检测距离：1~4mm （磁钢）

4. The detection distance: 1 ~ 4 mm (magnet steel)

5.磁钢尺寸：8×5

5. Magnetic steel size: 8 x 5

6.输出信号：矩形波 幅值：近电源电压

6. The output signal: rectangular wave amplitude: close to the power supply voltage

7.环境条件：温度：-20°C～80°C

7. Environmental conditions: temperature: - 20 ° C to 80 ° C

相对湿度：≤85%

Relative humidity: 85% or less

8.安装螺纹：M12×1

8. Install thread: M12 x 1

输出线 棕色：接电源+12V；蓝色：接电源地0V；黑色：接信号

Brown: output line to connect power + 12 v. Blue: to connect power to 0 v. Black: pick up the signal

北京冠测精电仪器设备有限公司