In order to keep its full function and precision it is recommended to have re-calibration done once per
year. Re-calibration will also be necessary after change of battery.
UV-Integrator.com
.
UV-int
UV-Integrator 1 50
The UV-Integrator 150 is a high quality UV measuring instrument. It is used to measure UV energy of
different light sources, especially on printing machines. It is ideal to ensure quality control of printing and
UV drying processes.
Small size, heavy duty pass-through Integrator with a diameter of 90 mm. It is reliable and simple to use.
The UV-Integrator 150 is available in five different measuring ranges:
(Please state upon order)
.1 Type 1 UV-Diazo 350 – 460 nm
.2 Type 2 UV-A 315 – 400 nm
.3 Type 3 UV 250 – 410 nm (Standard)
.4 Type 4 UV-B 280 – 315 nm
.5 Type 5 UV-C 230 – 280 nm
By addition of the incidence of the light quantities during the exposure cycle, relative values are
calculated.
Because of uneven radiation distribution of the UV light source and different type of construction of the
measuring devices by different manufacturers, different readings may appear under the same
measurement conditions.
Technical Data:
Spectral range: UV 250 – 410 nm
Measuring range: 0 to 5,000 mW/cm2
Display: 6-digit LCD
Display range: 0 to 999,999 mJ/cm2
Power source: long life 3.6 V Lithium Battery
Power consumption: 100 μA
Battery service life: 10,000 hrs
Dimensions: ? 3.5” (90 mm), height ?” (12 mm)
Weight: approx. 5.25 ounce (150 grs.)
Temperature range: 0 to 45° Centigrade
Heat protection: Heat shield on back plate
Base Accuracy: ± 5 %
While on the conveyer belt, the UV-Integrator 150 can withstand max. 110° Centigrade for up to 10
seconds. The temperature of the housing should not exceed 45° Centigrade.
Calibration:
In the standard version
it is measuring an integral
in the spectral range
from 250-410 nm,
with a peak
at the area of 365 nm.
R
Modle:UV-int 150
.6 Type 6 V-UV 130 – 250 nm