德国宝德6526型两位五通电磁阀，BURKERT6526型电磁阀
润滑、无油的干压缩空气；中性气体
与MP 12配套的法兰（参见图）
DIN 43650 C型插座连接器
可根据需要安装，但将执行机构朝上
Four conductivity sensors with different cell
constants (C = 0.01; 0.1; 1; 10) offer large capabilities
of conductivity measurement. The Pt1000
for automatic temperature compensation is
integrated in the sensor housing.
This sensor transmits directly an analog signal
via a 4 x 1.5 mm2 shielded cable, and is fitted
with a standard EN175301-803 plug connector
for the connection to remote conductivity
transmitter Type 8225 (maximal cable length of 10 m).
Compatibility With fittings S020 (see corresponding data sheet)
Stainless steel 1.4571 (316Ti)
FKM (EPDM included in delivery)
Electrode Stainless steel for cell constant C =0.01 or 0.1
Graphite for cell constant C =1.0 or 10
module Type 8225
Complete device data (fitting + sensor)
Pipe diameter DN 15 to 200
Conductivity measurement
0.05 μS/cm ... 200 mS/cm (depending on cell constant)
typical: 3% o. MV.* - max.: 5% o. MV.*
automatic (integrated Pt1000) - reference temperature 25°C
Medium temperature max.* With fitting in
PVC: 50°C (122°F) - PP: 80°C (176 °F) -
PVDF, stainless steel, brass: 100°C (212°F)
Fluid pressure max PN10 (see pressure / temperature chart)
* o. MV. = of measured value