Contact type NC (Normally Closed)
Nominal switching temperature (NST) 70 °C – 160 °C in steps of 5 K
Standard tolerance ± 5 K
Resetting temperature (RST) > 35°C
Operating voltage AC / DC 100V up to 500 V AC / DC – available, values on inquiry
Rated voltage (at 50Hz – 60Hz) 250 V AC
Rated current INOM (approved values)
2.5A cos j = 1.0 10,000 switching cycles
1.6 A cos j = 0.6 10,000 switching cycles
Current sensitivity at INom No
Max. switching current at 250 V AC 5.0 A cos j = 1.0 300 switching cycles
Contact bounce time < 1 ms
Impregnation resistance suitable (acc. to Thermik-test)
Contact resistance < 50 mW with reference to MIL – STD. R 5757
Vibration proof at 10 ..... 60 Hz 100 m/s2
Pressure stability of housing 150 N (acc. to Thermik-test)
Switch insulation Epoxy coating
Dielectric strength 1.450 V with reference to IEC
Standard connection leads multi stranded wire 0.25 mm2
Approvals acc. to design
VDE with reference to EN 60730 -1; EN 60730 -2-9
CB *) with reference to EN 60730 -1 (3rd); EN 60730 -2-9 (2nd)