济南仕壮机电设备有限公司生产模内贴标机，贴标合格率100%，20年技术沉淀,10天试机，技术培训，终身技术支持，欢迎来电咨询。

济南仕壮机电设备公司是生产模内贴标机，测漏机，输送带，旋盖机，削口机，有数十年的模内贴标机生产经验。

1              summarize

Strong-MT-II Specification：
It is a machine of Labeling In Mold .It is aim at various Automatic Blow Molding Machine at home and abroad, make use of nowadays international latest technique and the independence develops .This system adopts stand PLC and touch screen that reach a high performance, make the system run more stabilize , operate more simple and direct .            

Its characteristics is as follows:

l    The open type program design makes its adaptability more wide, that can connect with more model Automatic Blow Molding Machine ;

l    This machine adoption touch screen, the operation language can choose;

l    The operation is more simple, arbitrarily the location breakup, that can raise efficiency further;

l     Adopt an SMC technique;

l    Adopt the servo drives system;
l    Adopt Schneider &. OMRON electric device;
l    The system operating state and all input /output informations show at a screen directly ;
l    Have perfect protection and can carry on various function setups;
l    This machine has perfect procedure from the diagnostic system.

Its parameters is as follows:

l    External appearance(length× breadth× high):

                         1750mm×950mm×1450mm                                                                                                          

l    Journer:                 1100mm

l    Max. speed:              3000r/min

l    Number or control axis:     x axis and z axis

l    Max. breadth:             517mm(adjustable)

l    Min. breadth:             275mm(adjustable)

l    Consumer power:          1.1KW

l    Power supply                    220V50Hz