SPECIFICATIONS:

Structural Function Introduction:  1-Switching   2-Camera   3-Video   4-Play   5-RESET   6-VGA-HD Change-Over Switch   7-USB Interface   8-TF Card Slot   9- Operation Indicator    10- Charge Indicator    11- Microphone   12- Display   13- Glass  14-Support  15-Upper support slot   16- Photosensing device  17-Infrared Light for Night Vision   18- Lens   19- Speaker   20-Lower Support Slot     Operating Instruction1-Insert the TF card into the TF card slot on the left, start it by pressing the Switching. The operation indicator will be ON when the product is started up and a “Welcome” will appear. Wait for 3s until the product is ready. The TF card will be read when the product is under a standby state. The higher the capacity of the card is, the longer the reading time needs (3-5s);  2-Press the Video to start the video function under the standby state, every video clip lasts 2min. An unlimited loop recording is allowed. Repress the Video to perform an automatic storage of clips and go back to the standby state; 2 video types (2min) are provided and the pixels of which are 1280X720 and 720X480 respectively;  3- Pictures can be taken by pressing the Camera (1 picture / press) under the standby state; 4- VGA-HD Change-Over Switch-For video: VGA=720X480, HD=1280X720; For USB mode: the product, when stopped, can be connected to the USB of your computer. VGA= USB flash disk memory, HD=PC CAM (network camera); 5-The RESET can be used to restart the product if a crash is caused by an abnormal operation or running environment. 6- Press the Play for 3s to start the Play Mode, the files can be played and paused by short pressing the Play under the Play Mode; The Camera and Video mean Last and Next respectively. Quit the Play Mode by pressing the Play for 3s to return to the standby state; 7- A low battery signal will appear on the screen when the product is under low battery, charge the product as soon as possible; 8-The Video function will be started if the red light is ON under the charging mode, press Video to pause and keep the charging mode. If a prolonged video record is needed, no any other operation is allowed under the charging mode.

Key Features:

5,000,000 CMOS Viewing angle of lens   Wide-angle 150° Turning angle of lens   270° back and forth Resolution of video   VGA-720x480, HD-1280x720 Format of video   AVI Frame number of video   30fps Format of picture   JPEG Pixel of picture   2560x1920 Night vision   Yes Battery capacity   1800MA Screen   2.0TFT high resolution Time required for continuous video record   Approx. 4h Power consumption   250-300MA Recording scope   40m2 Type of memory card   TF card Capacity of memory card   512M-32GB Charging current   400MA Charging time   5h