282cps
Charge Plate System

Increase the utility of your Monroe Electronics Model 282 Electrostatic Fieldmeter by adding the 282CPS.

The Model 282CPS Charge Plate System is an accessory for the Model 282 Fieldmeter that permits the Model 282 to measure ionizer performance. The 282CPS includes a charge plate attachment for the fieldmeter and a charging source to charge the plate attachment. The fieldmeter then measures the plate voltage during balance and decay tests.

• Lowest-cost test method for periodic verification of ionizers• Correlates closely to charged-plate monitor test results• Performs both positive and negative decay tests• Also works with Model 281  Model 282CPS-1
Portable Charged Plate System
for use with
Monroe Model 282A-1
Digital Stat-Arc? 3 SPECIFICATIONS
Model 96138 Adapter Plate
Plate Capacitance: 20 Pico farads (? 5 Pico farads)
Range: 0 to ? 2kV
Grounding: Connection is made through conductive material of Model 282A-1 case
Weight: 1.5 oz
Dimensions: 2.4”L x 4.2: W x 0.9” D
(6.1 x 10.7 x 2.3 cm)
Model 280 Charger
Output: 1100VDC nominal, <1?A max.
Output Terminals: Two acorn buttons labeled (+) and (-)
Load Regulation: Better than 8% NL to FL
where FL = 109 ?
Battery Type: 9V NEDA, #1604 or equivalent,
40 hours of normal use.
Temperature Range: +100 to + 300 C (+ 500 to 860F)
Relative Humidity: 10% to 80 % non-condensing
Dimensions: 3.75” L x 2.88” W x 1” D
(9.5 x 7.3 x 2.5 cm)
Weight: 2.8 oz (79 gm)