TECHNIX7500-20000J/s CCR系列高压充电电源
价格:电议
地区:
电 话:86-010-65202180
传 真:86-010-65202182
产品品牌:
TECHNIX
产品型号:
7500-20000J/s CCR系列

法国TECHNIX高压充电电源,主要作为高压电容器以及MARX发生器等设备的充电电源。

These chargers constitute the high end range. Double Resonance Technology operating at high frequencies (50 kHz) offers a smooth switching to all the critical components and provides them a non-stressing behaviour.

Internal power dissipation, harmonics & ripple are significantly reduced.

Hence, they can operate without damage or interruption in rugged environments Many of them are used at full power 24 h/day, 7 days/week with no failure for many years. Four ranges of charge rates are offered in this series from 7.5 kJ/s to 20 kJ/s.

For higher charge rates, they can be configured to run in master/slave mode to reach 50 kJ/s and more.

An oil tank is integrated for the models from 20 kV and more.

  • Voltage & Current Ouputs continuously adjustable from 0 to full scale
  • Low stored energy
  • High Efficiency
  • Total protection against arcs, overloads and short circuits
  • Customized V and C full scales* with no extracost
  • V & C Setting and Monitoring from front panel or REMOTE
  • High precision regulation
  • Remote, Inhibit & Interlock functions
  • High reliability
  • Compact design
  • Double Resonance Technology (ZVC)
  • Automatic crossover
  • Over Current Limitation and Protection functions
  • Polarity display
  • Safety switch key
  • Master-slaves architecture allowing to go beyond 40 kW

* You can choose your own full scales (Vmax and Imax) even if these values are not available in standard. For example, you can get a 15 000 V generator based on 30 000 W model. In this case, you will get an Output Voltage adjustable from 0 to 15 000 V and an Output Current from 0 to 2 A.

  • Output Voltage and Output Current:
  • Both Voltage Output and Current Output are continuously adjustable from 0 to 100 % (full scale).
    In local mode: by using 10 turns potentiometers resolution 0.05%
    In remote mode: by an external 0 to 10 V

  • Voltage regulation
  • Load Regulation: ±0.05 % of full voltage (for 0 - 100 % load change); ±0.01% available on request.
    Line Regulation: ±0.05 % of full voltage ( for Main Voltage ±10 %); ±0.01% available on request.

  • Current regulation:
  • Load Regulation: ± 0.05 % (for 0 - 100 % load change)
    Line Regulation: ± 0.05 % (for Main Voltage ± 10 %)

  • Ripple + Noise:
  • 0.1 % p-p
    0.1% RMS for single phase models

  • Setting Time:
  • < 100 ms, 10 ms available on request

  • Stability (after one hour warm-up):
  • 0.01 % / hour, 0.03 % after / 8 hours of operating with constant load and ambiant temperature.

  • Temperature Coefficient:
  • 100 ppm/°C

  • Operating Temperature:
  • from 0 to 40°C

  • Efficiency:
  • > 92 % full load

  • Recovery Time After Arc:
  • < 1 mS

  • Stored Energy:
  • 1J / kW

  • Cooling by air:
  • Dust filter fans on front panel. Easily removable filters for cleaning.

  • Main Voltage:
  • 400 VAC ± 10 % 47 - 63 Hz 3 Phases + Earth from 1500 W

  • Power factor:
  • > 0.98

  • Calibrations:
  • with probes periodically approved by Authorized Measurement Laboratories

  • CE Marking