产品名称: ASKER橡胶硬度计
产品型号: D
产品展商: 上海腾明工贸有限公司
关注指数:27
产品文档: 无相关文档

简单介绍 ASKER橡胶硬度计测量硬度的基本因素之一是确定不同橡胶、人造橡胶及塑料制品的特性。适合特点的设计。所有的硬度计的生产及校准都是在人员的严格控制下进行的，可以保证并符合国内及国际标准.代理日本高分子ASKER橡胶硬度计中国总代理.产品库存量大.技术全面.提供五年质量保证及所有零配件及维修服务

ASKER橡胶硬度计的详细介绍

ASKER橡胶硬度计测量硬度的基本因素之一是确定不同橡胶、人造橡胶及塑料制品的特性。适合特点的设计。所有的硬度计的生产及校准都是在人员的严格控制下进行的，可以保证并符合国内及国际标准.代理日本高分子ASKER橡胶硬度计中国总代理.产品库存量大.技术全面.提供五年质量保证及所有零配件及维修服务.ASKER橡胶硬度计

ASKERDurometer Type DASKER橡胶硬度计

The Type D Durometer forhard rubber (high hardness) and plasticsASKER橡胶硬度计 Used world-wide for measuring hard rubbers and plastics, andspecified in the standards of JIS K 6253, ASTM D 2240, ISO 7619,DIN53505, etc.

Features

Indentor

Height: 2.50mm Shape: Sharp ConePoint

Pressure foot

The Pressure foot in contact with thespecimen is 44mm in width and 18mm in depth, wide enough to ensureaccurate measurement. Another type of durometer with an 18mm diameter pressure foot isavailable. In addition, the Longer Pressure Foot Type (DL Type) isapplicable for measurement of narrow or concave specimens .

Hardness TesterSelection Chart Our product line consists of varioustypes of durometers applicable to specific materials as indicated in the chart above. Type A Durometer (ASKER A type), conforming to JIS K 6235 is themost popular type of durometer for measuring rubber hardness. However, verification is recommended because a significantdifference is estimated to be the largest when a durometerindicates measurement values from 10 to 90 points. For hard specimens for which Type A Durometer readings indicatemore than 90 points, measurements should be undertaken using theType D Durometer (ASKER D type). However, for soft specimens withmeasurements of less than 20 points, the ASKER C type or Type EDurometer (ASKER E type) should be used. The most importantconsideration in using durometers is to select the correct type forpurposes of measurement according to the specimen.

Specification

Standards JIS K 6253 JIS K 7215 ASTM D 2240 ISO 7619 ISO 868 DIN 53505 Indicationrange 0 point - 100 point (262 degree dialscale) Minimumindication 1 point (Accuracy : ±1 point) Indentor Design(mm) Height: 2.50 30°Angle Sharp Cone Point Tip Radius0.1 Spring Forces[mN(g)] 0 point: 0(0) 100 point: 44500(4538) Central hole ofdiameter of Pressure foot Φ3 Pressurefoot Dimension (mm) 44×18(Rectangular) Outer Dimension(mm) Approx. Width 57×Depth 30×Height 76 Weight(g) 200 Application hard rubber, plastic

Outer Dimension(mm)

A custom designed pressure foot durometer is availableaccording to specimen conditions.

Option

Two-pointer type (max-hand andactive hand) of Rubber Hardness Tester The stationary set hand (max-hand) makes the maximum value easierto read and allows the creep characteristics of a specimen. Accurate measurement is made possible for specimens* for whichstress relaxation occurs over time or for specimens for which it isdifficult to take readings from the front. *Materials for which the reading decreases immediately after theindentor has been pressed against the surface.   Constant Loader forDurometer · Constant loarder assures uniform test pressure eliminatingfalse readings due to differences between operators in measuring byhand. · High accuracy and repeatability of the hardness readings areassured by the flexible joint function.   Indentor ExtensionTester · The gauge to check the indentor height on a durometer and thereading indicator mechanism. · Inspection is conducted at 2, 50, and 100 pointsrespectively.   Load Tester forHardness Tester · Tester to check load properties of the spring on a durometer · Inspection is conducted at 2, 50, and 75 pointsrespectively.

上海腾明工贸有限公司 原装进口各类精密仪器
https://www.tmdprecise.cn  DET: