北京疏水阀门厂 WDV S100倒吊桶式（过热蒸汽）疏水阀
价格：电议
地区：
电 话：86-0771-3931119
手 机：13481104141
传 真：86-0771-3258040
-
图文详情
-
产品属性
-
相关推荐
- 产品品牌：
- 北京疏水阀门厂 WDV
- 产品型号：
- S100
- 材质：
- 铸钢
- 连接形式：
- 法兰
- 种类：
- 蒸汽压力式
本公司供应北京疏水阀门厂 WDV S100倒吊桶式（过热蒸汽）疏水阀质量保证，欢迎咨询洽谈。
| 产品名称：倒吊桶式(过热蒸汽)疏水阀 | ||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
倒吊桶式(过热蒸汽)疏水阀
INVERTED BUCKET OVERHEAT STEAM TRAP
产品描述
倒吊桶过热蒸汽疏水阀专门用来克服过热，高压，小负荷等多种不利因素。
为了使蒸汽疏水阀在极端恶劣的工况下也能正常工作，采用一种独特的带有集水仓的倒吊桶型疏水阀。集水仓存集足够的凝结水，保证在整个排放周期都能够保持水封。集水仓中的小桶可以在进汽管口上下浮动。凝结水上升时，它封住进汽管。凝结水流入阀内，由于集水仓收集凝结水并且允许蒸汽从倒吊桶下部流进，故在集水期间排放阀紧密关闭，不存在滴漏现象。
此外，这种蒸汽疏水阀保持了倒吊桶型蒸汽疏水阀的所有特点：
1、耐磨损，耐腐蚀，耐水击。
2、独特的杠杆机构将桶提供的力充分放大，可在系统压力下开启阀门。
3、阀孔位于阀的顶部，脏物不会存积在阀孔上。
4、在压差冲洗作用下，脏的小颗粒以悬浮状态从阀内排出。
5、排放孔通过水封保护，可防止新鲜蒸汽泄漏，桶上的小孔可提供自动排空气。
6、倒吊桶疏水阀不需要专门调节，凝结水不会存积造成水击。
Product description
Inverted bucket overheat steam traps are specially used for overcoming unfavorable factors such as excessive heat, high pressure and small load.
Unique inverted bucket steam traps with drain sumps are adopted to assure sound operation of the steam traps under extremely atrocious conditions. A drain sump is filled with adequate condensate so that it can remain water-tight during the whole discharge cycle. The cup inside drain sumps is capable of floating up and down at the opening of the intake pipe. When condensate flows up, the cup can envelop the intake pipe and the condensate flows into the trap. As the drain sump can collect condensate and allows steam to enter from the bottom of the inverted bucket, the discharge valve is closely shut during water collection period without any dripping or leakage.
Besides, this type of steam traps retain all features of inverted bucket steam traps:
1.They are resistant to abrasion, erosion and water hammer.
2.Their unique lever mechanism is able to adequately enlarge the strength offered by the bucket so as to start valves under the system pressure.
3.The valve port is located on the top so as to prevent dirt accumulating on the port.
4.Dirty particles are discharged from inside valve in a suspended state under differential pressure washing.
5.The discharge hole protected by water sealing, can prevent leakage of fresh steam; and the hole on the bucket can discharge air automatically.
6.They do not need special adjustment and the condensate water will not deposit to cause water hammer.
工作条件Maximum working condition
允许压力（壳体）:
WDVS64：6.9Mpa@427℃ WDVS100 : 10.5Mpa@454℃
工作压差Maximum operating pressure differential
WDVS64 : 6.9Mpa WDVS100 : 10.5Mpa
连接型式Type of connection
螺纹（仅用于WDVS64），承插焊(W)，配制法兰(F)
Screw thread (only used for WDVS64), bear insert welding, equipped with flange
材质Material
阀体(valve body) :
WDVS64 A105 ASTM Gr.B碳钢Sch.80管(Gr.B carbon steel Sch 80 ducts)
WDVS100 316L ASTM A312不锈钢Sch.80管(A312 stainless steel.Sch 80 ducts))
内件(inner part:) :
304全不锈钢(304 stainless steel)
阀瓣及阀座 : (valve clack、valve seat)
司太里合金Staly alloy
接口 : WDVS64 304全不锈钢(304 stainless steel)
WDVS100 316L 不锈钢(316L stainless steel)
注解：
1、选型时请提供工作压力、工作压差、凝结水发生量、工作温度、连接方式及标准。
2、凝结水负荷的安全系数一般为2～3倍。
3、正确安装、定期保养清除阀内污物，保证疏水阀正常工作和延长使用寿命。
Note
1. Please provide operating pressure and operatingpressure difference, generating quantity of condensate water, operating temperature, connecting mode and standards in selecting product models.
2. The load of condensate water’s safety coefficient reaches 2 to 3 times in general.
3. Please make sure the drain valve is installed properly, maintained regularly, cleaned up and operates under the normal condition, so as to extend its service life.
订货须知Order notice 请指明：型号，连接口径及连接方式
|
||||||||||||||||||||||||||||||||||||