日本岩崎IWATSU 罗氏柔性电流探头 SS-240A-维库仪器仪表网

产品详情大图

仪器仪表首页

日本岩崎IWATSU 罗氏柔性电流探头 SS-240A

价格：电议

地区：湖南省长沙市

电话：0731-85260926

手机：18665876229

传真：0731-85263946

长沙力高捷创仪器有限公司

免费会员营业执照已上传

全部产品进入商铺

图文详情
产品属性
相关推荐

日本岩崎IWATSU 电流探头Current probes SS-240A SS-250

	Supports various applications
	Displays its capabilities in full force in current waveform observation and wide-band applications such as switching power supplies, optical disc manufacturing lines, and semiconductor power devices.

Features

	Low noise characteristics for easy milliampere order observation

	Wide bandwidth - DC to 100 MHz (SS-250)/DC to 50 MHz (SS-240A)

	High sensitivity and wide bandwidth implemented through use of thin-film Hall element

	Power can be provided directly from the oscilloscope (Models with on-board power supplies for Iwatsu probes: TS-81000, TS-80600, SS-7840H, SS-7840, SS-7830 Models that are no longer available: TS-8500, SS-7825 and others with on-board power supply connectors)

	Clamp te, enabling easy measurement without having to disconnect the electrical circuit

	Equipped with a function that provides simple protection for excessive input

	Can also be used with measuring instruments that do not have a power supply for probes (power can be provided through the optional probe power supply PS-26)

Specifications

Item		SS-250	SS-240A
Bandwidth		DC to 100 MHz (-3dB)	DC to 50 MHz (-3dB)
Maximum input current	Maximum input range	30 A rms	30 A rms
	Maximum peak current	50 A peak, non-continuous	50 A peak, non-continuous 50 A peak at pulse width <= 10 μs
Output sensitivity		0.1 V/A
Sensitivity accuracy		?±1.0% of reading ±10 mA for probes only (in the range from 0 to 30 A rms, DC, and AC 45 to 66 Hz) ?±2.0% of reading for probes only (50 A peak or less and over 30 A rms, DC, and in the range of AC 45 to 66 Hz)
Noise		2.5 mA rms or less (observation using an oscilloscope with a 20 MHz band)
Power consumption		5.3 VA max.	5.6 VA max.
Power supply voltage		±12 V ±0.5 V
Operating temperature and humidity		0°C to +40°C, 80% RH or less (no condensation)
Storage temperature and humidity		-10°C to +50°C, 80% RH or less (no condensation)
Operating elevation		2000 m or less (air pressure approx. 79 kPa), indoor
Effects of external magnetic field		5 mA max. or equivalent (in DC, 60 Hz, 400 A/m AC magnetic field)	20 mA max. or equivalent (in DC, 60 Hz, 400 A/m AC magnetic field)
Maximum usable circuit voltage		300 V, CAT I (insulating conductor)
Conductor diameter that can be measured		? 5 mm
Cable length	Sensor cable	Approx. 1.5 m
	Power cable	Approx. 1 m
Size	Sensor part	Approx. 175 (W) x 18 (H) x 40 (D) mm
	Termination part	Approx. 27 (W) x 55 (H) x 18 (D) mm
Weight		Approx. 240 g	Approx. 230 g
Complied with standards	Safety	EN61010-2-032:2002 Measurement category I (expected overvoltage: 1500 V), Pollution degree: 2
	EMC	EN61326:1997+A1:1988+A2:2001
Accessories		Instruction manual (1), hard case (1)	Instruction manual (1), soft case (1)

*	Values for performance/accuracy items are at 23°C ±5°C and 30 minutes after power-on.

Characteristics figures

SS-250 Continuous maximum input range (frequency derating)

SS-240A Continuous maximum input range (frequency derating)

*	These current probes can be used as-is with oscilloscopes that feature power supply connectors for active probes. Current probes can also be used with oscilloscopes without power supply connectors for active probe, when used in combination with the power supply (PS-26) that is sold separately.
*	Use a jack plug conversion BNC plug adapter for oscilloscopes for which connection to the SS-250/SS-240A is obstructed due to the input BNC connector being built into the external case (Iwatsu product DS-8710/8706).
*	When the SS-250/SS-240A is used with an oscilloscope with a power supply for a probe, if the current being measured is large, the power supply for current probe PS-26 may be required.
*	With the power supply for current probe PS-26, if the current being measured is large, it may not be possible to use two SS-250/SS-240A units at the same time.

Caution
1.	Use this product in circuits that do not exceed the maximum usable circuit voltage, so as to avoid accidents such as short-circuits and physical injuries.
2.	Do not use this product with bare conductors, so as to avoid accidents such as physical injuries and short-circuits when the leading end of the clamp core is opened.