产品名称:PU开口齿型带 型号 齿距(mm) 标准宽度(INCH OR MM) XL 5.080 0.25” 0.31” 0.37” 0.50” 0.75” 1.00” 1.50” 2.00” L 9.525 0.50” 0.75” 1.00” 1.50” 2.00” 3.00” 4.00” ------ H 12.700 0.50” 0.75” 1.00” 1.50” 2.00” 3.00” 4.00” ------ XH 22.225 1.00” 2.00” 3.00” 4.00” ------ ------ ------ ------ T5 5. 32 ------ T10 10. 32 ----- - T20 20. 75 ------ ------ AT5 5. ------ AT10 10. ------ ------ AT20 20. ------ ------ HTD5M 5. ------ ------ ------ HTD8M 8. ------ HTD14M 14.00 25 85 ------ ------ STD5M 5. ------ ------ ------ STD8M 8. ------ All these belts are extruded, open-ended timing belting tension cords parallel to the edges.They are primarily used in linear and conveying drives. ■ transmission of high tensile forces ■ available in roll lengths of up to 100 metres ■ fabric coating on tooth face and/or belt back possible ■ reinforced versions for linear drives ■ low maintenance ■ high positioning accuracy Section Pitch Belt height tooth height Standard tension cord ￠ Tensile strength b=100mm* Breaking strength b=100mm* Min. number of teeth of the pulley Min pulley diameter 2.2 1.2 0.3 1690N 7650N 15.05 4.5 0.6 7100N 32130N 36.25 T20 8.0 5.0 13500N 48000N 15 92.65 AT5 2.7 1.2 0.51 3500N 11800N 17.85 AT10 5.0 16000N 60000N 15 45.90 AT10L 5.0 1.N 65000N 77.70 AT20 9.0 5.0 1.N 65000N 18 111.50 9.525 1.9 3.6 0.6 7000N 29400N 29.59 12.7 2.29 4.36 0.6 6500N 30600N 14 55.25 XH 22.225 6.35 11.N 47250N 18 124.53 3.7 2.2 0.51 3500N 11800N 14 21.14 5.6 3.38 7000N 3500N 18 44.47 14M 14 10.0 6.1 1.N 65000N 108.70