E4416A E4417A 功率計
价格:电议
地区:
电 话:86 0769 33355531
传 真:0769 0769 23362124

中赛仪器库存大量各种高频仪器现货特价出售中--本公司长期现金大量高价回收各种高频仪器;如-网络分析仪-视/ 音频分析仪-信号发生器-频谱分析仪-手机综合测试仪 阻抗分析仪  LCR电桥 示波器 高压测试仪  静电放电发生器等等…..仪器联糸人;张彬  13556784911/电话;传真;                                   0

选用二手测量仪器的优势是: 
1
、与新购仪器几个月的供货期相比,购买二手仪器的供货期要短的多。在时间就是市场的今天,优势无疑是为明显的。 
2
、二手仪器的价格便宜,基本为新购仪器价格的20%50%。在电子技术迅速发展的今天,仪器的更新也在加快,投资越少则风险越小。 
3
、为了让您放心地使用我们提供的二手仪器,我们销售的二手仪器可以做到:
      1
、保修半年至一年不等。
      2
、可以根据您的要求,将仪器送至计量测试单位进行校准。

The AgilentE4416/17A EPM-PSeries power meters provide peak, average, peak-to-average ratio and time-gated measurements, using the E9320 peak and average power sensors. The E4416/17A are compatible with all 8480 and E-series power sensors.

TheE4416Ais asingle-channelpower meter.

TheE4417Ais a truedual-channelpower meter, which means that you get two simultaneous power readings on the display.

The E4416/17A do not have legacy power meter code compatibility because they are targeted at new applications such as time-gated power measurements. Code compatibility is however provided by the EPM Series power meters (E4418B and E4419B) as they are a direct replacement for the 436A, 437B and 438A.

  • Simultaneous peak, average and peak-to-average ratio power measurements
  • Time-gated power measurements
  • Up to 1,000 corrected readings per second over the GPIB
  • 20 Msamples per second sampling rate for reliable continuous and single shot measurements on wide bandwidth signals
  • Compatible with all 8480 and E-Series power sensors
  • Easy-to-read display - large 1-line or 4-line numeric display, or trace display, or an analog display
  • 8 pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth, IS-95 CDMA, W-CDMA and cdma2000)

The AgilentE4418/19Bare low-cost, high-performance, programmable RF power meters. They are fully compatible with the 8480 series and the E-Series power sensors (except the E9320A family). Depending upon which sensor is used, the E4418/19B can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz.

Designed for bench and ATE use, the E4418/19B makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.

TheE4418Bis asingle-channelpower meter.

TheE4419Bis a truedual-channelpower meter, which means that you get two simultaneous power readings on the display.

  • Fast measurement speed (up to 100 readings per second, over the GPIB, with E-Series sensors)
  • Speed improvement of x2 using the 8480-Series power sensor (compared to the 437B)
  • No range-switching delays with 8480 series sensors, and only one fast-range switching point with E-Series sensors
  • RS-232/422 Interfaces as standard
  • GPIB Interface for remote control of all functions
  • Code compatibility with HP 436A/437B (E4418B) and 438A (E4419B)