-
图文详情
-
产品属性
-
相关推荐
全套设备可以完成对室内空气质量深入彻底的分析,IQM60空气质量监测仪的单一设备可以同时检测大多数室内空气质量的常规参数,可监测的参数包括:CO2二氧化碳,CO一氧化碳,VOC可挥发物,O3臭氧,NOW二氧化氮,零上温度,湿度及可选颗粒物监测,携带切割头包括 TSP,PM1,P2.5及 PM10.
空气质量数据可以显示在设备上并且可以记录在 SD存储卡或者有软件支持的电脑里。存储的数据可以以 MS表格的形式输出。
利用高性能的分析半导体技术和其它的光学传感器,IQM 60完整的全套设备可以完成对室内空气质量深入彻底的分析和检测。
特点:
分析半导体技术/PID/NDIR
复合气体传感器(6种以上)
工厂鉴定 NIST描绘
温湿度传感器
颗粒物监测(可选)
主动的空气采样系统
重复实时数据采样
小值/值/平均值采样
大容量内部数据存储
RS232/USB通讯
PC数据存储软件
用户自定义校准
无线通讯协议(可选)
静音操作
低维护
便携性
应用领域:
IAQ疾病研究和分析
HVAC系统性能监测
Sick Building综合病症(SBS)
健康和舒适的评定
土壤研究和补救
机场休息室
办公大楼
商场
学校和幼儿园
医院
养老院
IQM60规格表
气体种类 | 量程/ppm | 检测限 | 工厂校准准确度 | 分辨率⑵ | |
Carbon Dioxide CO2 (NDIR) | 0-2000 | 6 | <40 ppm + 3% of reading | 10 | 1 |
Carbon Dioxide CO2 (NDIR) | 0-5000 | 6 | <150 ppm + 5% of reading | 10 | 1 |
Carbon Monoxide CO (GSE) | 0-100 | 0.2 | <±2ppm 0-20ppm; <±10% 20-100 ppm | 0.2 | 0.1 |
Ozone O3 (GSS) | 0-0.15 | 0.001 | <±0.005 ppm | 0.002 | 0.001 |
Ozone O3 (GSS) | 0-0.5 | 0.001 | <±0.008 0-0.1 ppm; <±10% 0.1-0.5 ppm | 0.005 | 0.001 |
Nitrogen Dioxide NO2 (GSS) | 0-0.2 | 0.001 | <±0.010 0-0.1 ppm; <±10% 0.1-0.2 ppm | 0.005 | 0.001 |
Volatile Organic Compounds (PID) (1) | 0-20 | 0.01 | <±10% | 0.02 | 0.01 |
Non-methane Hydrocarbon (GSS) (1) | 0-25 | 0.1 | ≤±10% | 0.2 | 0.1 |
Volatile Organic Compounds (GSS) (1) | 0-25 | 0.1 | ≤±10% | 0.2 | 0.1 |
(1) Calibrated to isobutylene (non-specific sensor) | |||||
(2) Gas concentration is displayed in units of ppm on the IQM 60 instrument and available in units of ppm or mg/m3 in the supplied PC software | |||||
Temperature & Humidity Sensor | Range Temp. | Range RH | Accuracy Temp. | RH @ 25°C | Temp Res. | RH Res. |
-20°C to +100°C | 0-100% RH | ±0.3°C | ±2% RH | 0.01°C | 0.1% RH | |
Particulate Profiler | Range | Particle Sizes | Accuracy | Flow rate | Resolution |
2-channels : >0.3 μm & >2.5 μm | 0-100000 PPL | >0.3 & >2.5 μm | ±10% to calibration aerosol | 1.0 LPM | 1 PPL |
Particulate Profiler | Range | Particle Sizes | Accuracy | Flow rate | Resolution |
8-channels : 0.3 to 10 μm | 0-100000 PPL | 0.3-10 μm (8) | ±10% to calibration aerosol | 1.0 LPM | 1 PPL |
Particle Monitor | Range | Sensitivity | Accuracy | Precision | Resolution |
Inlet options : PM1 PM2.5 PM10 TSP | 0-2000 μg/m3 | 1 μg/ m3 | 8% of NIOSH 0600 | 3 μg/ m3 | 1 μg/ m3 |
Controller Module | Communication | Data Storage | Data Sampling Rate | Display | PC Software |
RS 232 | 2 GB SD card | 2 to 255 minutes (programmable) | VFD 4 x 20 | Included | |
Gas Treatment Module | Sampling Pump | Zero Scrubber | Replaceable Zero Scrubber Media Cartridges | ||
BLDC | Built-in | Chemisorbant, activated carbon & Hopcalite | |||
Environmental Operating Range | 0 to 50°C; 10 to 90% RH (non-condensing) | ||||
Communication Interface | RS 232 (DB9 port) Cable & USB adaptor supplied | ||||
Power Supply (standard) | Switch mode power supply 12V DC Input 90-260V AC; 47-63Hz | ||||
Remote Communication (optional) | GSM/GPRS modem; Ethernet; Wireless | ||||
Portable Power Station (optional) | Li-ion battery station & charger 222WH or other capacity | ||||
Dimensions | PM models : 378 x 236 x 132 (mm) Non PM models : 278 x 236 x 132 (mm) | ||||
Enclosure Material | Aluminium & powder-coated steel | ||||
Instrument Weight | Net 4-9 Kg (subject to configuration) | ||||
Instrument Carry Case | Impact & water resistant 515 x 430 x 200 (mm) |
爱尔科Aeroqual
制造商
全新
新西兰