CMD55综合测试仪
CMD55产品特点：
·是测量GSM及GSM1800移动电话的紧缩式单元
·通过RS232，IEC/IEEE远控
·前面板有多功能连接器
·话音编码器/解码器可被集成
·可选择安培表和伏特表
·高敏感度二级RF输入
·可改进为GSM、GSM1800及GSM1900测试
 
CharacteristicsThe
CMD52 is a compact unit for testing GSM900 mobiles. The CMD55 is
furthermore capable of testing GSM1800 (formerly named PCN orDCS1800)
 and GSM1900 (formerly named PCS or DCS1900) mobile phones. Both models
 are favourably priced and combine small dimensions with high
measurement accuracy and speed.The testers range of capabilities
includes all signalling, generator and measurement functions required
 for verifying the correct operation of the DUT (Device Under Test).
Thanks to its fast go/nogo tests and accurate analysis using optional
 extensions, CMD52 and CMD55 are equally well suited for R&D, production
and high-end service and production.Based on the wide-range know-how
of Rohde & Schwarz in digital radiocommunication testing, which not
least was obtained in developing type-approval test systems such as
 the GSM900 and GSM1800 system simulators, both CMD models are top-
grade testers for present and future measurement applications.Test
capabilitiesTo test mobile phones, the CMD simulates a GSM900, 1800
 or 1900 base station. One of the two RF synthesizers available for
this purpose delivers a continuous BCCH signal while the other one
provides all 8 timeslots for TCH signals.The major test functions are
:Mobile synchronizationLocation updateIncoming call setupOutgoing
call setupMobile power level controlHandover (channel change, timeslot
 change)Peak power measurementHigh dynamic range burst analyzer
(option CMD-B4 and CMD-B42)Spectrum due to Switching measurement
(option CMD-B4 and CMD–B43)Spectrum due to Modulation measurement
(option CMD-B4 and CMD–B43Timing Advance measurementSACCH measurement
 (eg RxLev, RxQual, power level)Echo testCall clearing by mobile
phoneCall clearing by CMDDC current/voltage measurementsPhase and
frequency error measurement (option CMD-B4)Measurement of power
ramping as a function of time (option CMD-B4)Bit-error rate (BER)
 and Fast BER measurement (option CMD-B4)OperationOperation of the
CMDis extremely user-friendly and requires no detailed GSM/PCN knowledge.
The high-contrast, backlit LCD provided with softkeys on both sides
allows convenient callup of test routines under menu control. Various
 network-specific parameters are preset and permit direct testing
without any operator control. In addition, it is of course possible
to modify all parameters individually in the configuration menus.AutotestThe
autotest function enables complete measurement routines to be started
 at a keystroke without any further intervention by the operator
 being required. The test results in tabular form are displayed on
the screen.Remote controlThe CMD is remote-controlled via the RS-232
 or IEEE/IEC-bus interface using SCPI-compatible commands. In the
remote-control mode the CMD is designed for fast speed to yield high
 throughputs in production.Echo testThe echo test allows very rapid
go/nogo analysis covering all essential parts of the mobile. Words
spoken into the microphone of the mobile are sent to the CMD, stored
in buffer memory and sent back to the phone. In this way it is possible
 to check the whole signal path from the microphone via the RF transmitter
 section, RF receiver section, modulator, demodulator, signalling
section, speech coder/decoder, analog audio components through to
the loudspeaker.Testing handheldsIn addition to the normal RF input
/output, the CMD has a high-sensitivity input and a high-level output
 which enable tests on modules or on handhelds with built-in antenna
by using couplers like the CMD-Z10.Module testingFault localization
in mobile telephones requires various measurement functions that can
 also be used without signalling so that defective units can be tested
down to modular level. The basic model of CMD already provides some
of these functions, eg signal generation with or without modulation
or power measurements, other functions being available as optional
extensions.
备注:
    本公司是经营二手仪器仪表的公司，长期大量销售、回收、租赁、维修、
计量等业务服务。有着广大市场网络大量库存！

主要经营的各种进口二手仪器仪表有：手机综合测试仪、蓝牙测试仪、WIFI测试仪、
频谱分析仪、音频分析仪、网络分析仪、示波器、视频分析仪、信号源(信号发生器)
、无线综合测试仪、LCR电桥、电源、电子负载、功率计、光谱分析仪、频率计、天馈
线测试仪、万用表、电视信号发生器、等二手中仪器……

主要经营品牌有：美国安捷伦（惠普）、美国福禄克、美国泰克、德国罗德与施瓦茨
、日本爱德万、日本安立、日本横河、日本松下、日本健伍、日本菊水、英国马可尼
、等等……
    本公司具备人事；根据仪器市场的具体供求的状况，从众多产品中精选
出质量可靠适合各电子行业的优良产品推荐给广大用户，为用户节约投资成本、降低
投资风险。也为人类资源再次利用、做出贡献。经过多年的风雨拼搏，冲洗出了我们
的和实力，客户已由全国辐射至，并与国内外许多企业、科研院所建立
了长期而密切的合作关系。公司也凝聚了一批具有丰富实践经验的人才，具备了
雄厚实力。在未来的发展中，我们将致力于客户之需，继续在仪器销售、回收、租赁
、维修、计量方面再创特色；不断提高服务质量，追求着用户实际所需。与时俱进，
再创辉煌！