HI1710A微波测量系统采用50/60Hz，100-240V的具有瞬变保护装置的电路供电，操作仪器的面板的电源开关即可打开或和关闭仪器，仪器提供二个不同时间响应特性，符合CDRH的CFR 1030.10微波炉的性能标准要求的快速自动扫描系统。

HI1710A微波测量系统探头（HI2623）是一个直径为5cm的圆锥体，满足CDRH性能标准要求，通过电缆连接仪器面板接口，从HI1710A读出数据。

HI1710A微波测量系统具体模拟图形显示，数字报警设置，RS232接口连接计算机进行控制，打印机接口，模拟信号输出。通过RS232接口，在实验室可以探访到所有测试数据，实现半自动产品检测质量保证系统。峰值保持和清零按键使测量更加准确，重现性更好。

特性：

校准：2450MHz.在ISM（工业、科学及医疗设备）范围内

量程：4量程，分别为0-1, 0-2, 0-5, 0-10mW/cm2。

响应特性： F1 (慢速) –小于3秒

F2 (快速) – 小于1秒

功率密度：2.0 W/cm2 (2000mW/cm2)

输入功率:100-240V，0.8-0.4A（max.），50-60Hz

保险丝：250V,1.0A,型号T (5 mmx20mm)

输入控制：

Zero调零位-干燥开关关闭到零。

RS-232-标准通信输入。

控制输出:

Alarm Output报警输出- 从背部面板连接（Alarm Output24V 1 Amp）

analog output模拟输出：从背部面板连接（analog output 4 VDC max. 1 mA max.）。

RS-232 ：从背部面板连接（RS-232）标准通信输出。

环境:

温度：15- 40℃

湿度: 5%-95%，无冷凝

尺寸：311x254x127mm

探头：（HI2623）

探头长度: 305mm

电缆: 2.74米

运输重量:3.6 KG

HI-1710A Microwave Oven Survey Meter

The HI-1710A combines the proven and reliable diode sensing technology of the Holaday Microwave Survey Meters with the digital processing techniques developed for automatic oven scanning.

Key Features

Analog bar graph

Auto-ranging

Digital Alarm Set

Optional Remote Zero

Removable Sensing Probe

RS-232 Interface

Serial Printer Output

Description

The RS232 interface allows easy adapting of the unit to computerized data acquisition in laboratory studies and semi-automatic production test systems. Digital Peak-Hold and Push Button Zeroing aid in improving testing productivity and reducing errors. Digital filters, selected from the front panel, provide the “Fast” or “Slow” responses familiar to analog survey instrument users. Built in self-test sequences test meter performance at turn-on and each time the meter is zeroed. Diagnostic functions accessed from the front panel give quick indications of meter status.

Product Testing

On power-up, the HI-1710A is automatically configured for normal production testing, relieving the operator of a complicated setup operation. Simply activating the Peak-Hold feature from the front panel and adding a serial printer results in a formatted RF leakage report each time the ZERO key is pressed. With the Remote Zero Option, testing and reporting are accomplished without reaching to touch the instrument or setting down the probe for even greater operator efficiency. The Remote Zero Chamber provides a location shielded from stray RF fields by simply inserting the probe. An optional alarm output contact transfer provides remote signaling capability (24 VAC, 1A). The separable probe/pre-amp assembly (HI-2623) means that daily ellipticity checks and periodic calibration checks can be made without removing the instrument from service. Spare probes, available from Holaday, can be pre-checked for immediate exchange with no meter down time. Auto-ranging and the bar graph display make it quicker and easier for the operator to accurately perform oven leakage testing.

Laboratory Measurement

The HI-1710A is ideally suited for engineering studies with a 0-1Vdc analog output for chart recorders and plotters. The remote control and reading features allows use in many automated data acquisition configurations.

Standard Configuration

Digital Alarm Set

RS232 Interface for Computer Control

Electrical Specifications

Frequency：2450 MHz

Ranges：0-1, 0-2, 0-5, 0-10 mW/cm²

Physical Specifications

Cable length：1.2 m (3.94 ft)

Probe Length：30 cm (11.81 inches)

Specifications

Power Supply：100 - 240 VAC 50/60 Hz