中心频率: 100kHz - 2GHz , 1.7GHz - 23GHz SPAN: 1kHz - 200MHz RES BW: 100Hz - 3MHz SWEEP TIME: 2ms - 10s VIDEO BW: 1Hz - 3MHz The Anritsu MS710E spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS710E. The CRT displays received signal strength (y-axis) against frequency ( x-axis). Some applications for Anritsu MS710E Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Anritsu MS710E spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu MS710E spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.以上是MS710E频谱分析仪的详细信息，如果您对MS710E频谱分析仪的价格、厂家、型号、图片有什么疑问，请联系我们获取MS710E频谱分析仪的新信息。